lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-26-2022, 09:22 PM   #11
cartdoc1969
Gone Wild
E-Z-GO
 
Join Date: Sep 2021
Location: Pa
Posts: 263
Default Re: RXV Curtis Controller won't move

The controller will check the reverse buzzer during the startup tests. It's one of the last tests in the sequence and will not pass if it doesn't see it. I believe on the Curtis units the reverse buzzer can be turned off in the settings. You'll need to get the connection clean enough so the handheld can communicate with the controller. I would take a close look at the wiring harness for corrosion or poor connections. Check the run plug under the cup holder, it's a common failure point.
cartdoc1969 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
36 volt ez go/ curtis controller wont move Electric EZGO
1999 TXT DCS w/Curtis controller will not move after being towed in run mode Electric EZGO
Can i change out curtis controller 1264-5407 to a curtis 1510A-5251 by repin the con Electric EZGO
Stock curtis 300amp controller to Alltrax SR controller for a 94 club car ds Electric Club Car
Is the Curtis 1311-1101 Controller Handset PMC a good controller Electric EZGO


All times are GMT -5. The time now is 03:34 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.