lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-16-2022, 09:14 PM   #1
Linguolizzard
Not Yet Wild
Mixed Breed
 
Join Date: Jun 2022
Location: Pine Mountain Club, CA
Posts: 15
Default Can a 3 pin rocker FnR switch be wired to replace a DCS FnR lever?

Hi all,

Wondering if I can replace my DCS lever with a 3pin rocker like on an EZgo PDS. I know it can be done with a 6 pin but Iím having trouble finding them with housing. The three pin ones all come right on a plate with key switch, lights and phone charger. I can always pop out the FnR switch and put a secondary light switch there but if I could make it work I would like to keep it all right there.
Linguolizzard is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Changing keyed Forward/reverse switch to rocker switch Electric EZGO
Wiring F/R rocker switch to replace bell type Electric Club Car
99 club car 48 volt has rocker switch with diag plug hole in bottom of switch Electric Club Car
Light switch wired to ignition Gas EZGO
'84 Marathon,lights wired into switch? Electric EZGO


All times are GMT -5. The time now is 03:13 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.