|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-01-2017, 09:28 PM | #11 |
Gone Wild
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,955
|
Re: Preparing to start a G1 J10
The green gas makes me think the last person to fill it was using premix rather than the oil injection system. You might want to do the same in case the pump isn't working or was removed.
Rinse the tank out with a little bit of fresh gas at a time until it comes out as clear as it went in. I'm not familiar with Yamaha carts. The parts that came out might be the fuel pickup tube or similar. Might want to get a parts manual if one of the Yamaha experts here can't help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-02-2017, 12:10 AM | #12 | |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Preparing to start a G1 J10
Quote:
http://www.tntgolfcar.com/yamaha-par...5_440_682.html |
|
11-02-2017, 04:43 PM | #13 |
Gone Wild
Join Date: Oct 2017
Location: Dallas, Texas
Posts: 170
|
Re: Preparing to start a G1 J10
Thanks for the responses so far everyone! Is anyone else annoyed by the fact the cart can't move unless under power?!
Concerning a couple things about my photos above, is the J10 cart frame grounded? I see in some diagrams the battery negative terminal being grounded at the frame and others where it leads to the solenoids.. It appears that mine was grounded to the frame based on the cable length. Any tips on wiring it to run with 1 solenoid in the forward position? |
11-02-2017, 04:44 PM | #14 |
Gone Wild
Join Date: Oct 2017
Location: Dallas, Texas
Posts: 170
|
Re: Preparing to start a G1 J10
Could you share a link Jetboat? Also posted a ton of photos :)
|
11-02-2017, 06:37 PM | #15 |
Not Yet Wild
Join Date: Oct 2017
Location: Beaumont, CA
Posts: 35
|
Re: Preparing to start a G1 J10
I think you need to remove the belt so you can move it around. I'm not sure how ad a link from my phone but here is a screen shot of what I ordered and it worked great.Screenshot_2017-11-02-16-31-46.jpg
|
11-02-2017, 07:48 PM | #16 |
Not Yet Wild
Join Date: Oct 2017
Location: Beaumont, CA
Posts: 35
|
Re: Preparing to start a G1 J10
Here is the link. https://www.amazon.com/iFJF-Carburet...+g1+carburetor
|
11-02-2017, 10:50 PM | #17 |
Not Yet Wild
Join Date: Jun 2009
Posts: 65
|
Re: Preparing to start a G1 J10
The negative cable goes from the battery to the chassis under the 1/2" bolt that I have circled in your picture. It's the same bolt that mounts the fender to the frame.
|
11-03-2017, 10:22 AM | #18 |
Gone Wild
Join Date: Oct 2017
Location: Dallas, Texas
Posts: 170
|
Re: Preparing to start a G1 J10
Thank you so much Big Inch! That is a huge help. I am step by step getting closer and closer. Ready for the weekend to get here so I can spend some time working on the G1.
|
11-05-2017, 07:31 AM | #19 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: Preparing to start a G1 J10
are you sure the brakes aren't locked up and not the rear end?
service manual http://www.buggiesgonewild.com/garag...ir-manual.html |
11-08-2017, 11:55 AM | #20 |
Gone Wild
Join Date: Oct 2017
Location: Dallas, Texas
Posts: 170
|
Re: Preparing to start a G1 J10
UPDATE: Decided to sell the engine out of the cart in preparation for a swap after realizing that both solenoids are shot. The old 2 stroke is however not seized and also has lots of good parts I have seen people here asking about including the muffler and shroud! Prefer to sell a whole but willing to part. Let me know if you are in need of anything or can think of any one who might be interested.
See post here: http://www.buggiesgonewild.com/golf-...arts-sale.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
Factory pedal start with recoil start clone | Clone Engine Swaps | |||
Gas club car solenoid click no start(Key start) | Gas Club Car | |||
Preparing for the upgrade | Big Block Talk! | |||
whats the difference between a key start and pedal start fe350ccw? | Gas Club Car | |||
Preparing Vtwin for the elements off road | Big Block Talk! |