|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-19-2021, 08:09 AM | #1 |
Born to be Wild
Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 2,772
|
Lowering an EZGO TXT
I'm thinking about lowering my EZGO TXT and have read a lot of posts where people are using a 2" spacer in the rear. My springs are 1-3/4" wide so I have ruled out 2" square tube for now. So tell me, what are you using?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2021, 09:54 AM | #2 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Lowering an EZGO TXT
You can use a piece of 1 3/4" square tubing and a piece of 1/4" flat bar if you want a true 2" drop.
Or the same 1 3/4 tubing and re-drill your rear shackles 1/2" shorter to drop it an additional 1/4" |
11-19-2021, 02:48 PM | #3 |
Born to be Wild
Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 2,772
|
Re: Lowering an EZGO TXT
Good idea didn't look to see if square tube came in 1-3/4" which would be close enough. I have 2" and 1-1/2" so off to the metal store now.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Lowering an EZGO | On Road Golf Carts! | |||
99 EZGO lowering kit. | Electric EZGO | |||
Lowering my ezgo | On Road Golf Carts! | |||
gas EZGO lowering | On Road Golf Carts! | |||
lowering 97 ezgo | Electric EZGO |