09-28-2022, 08:50 AM | #1 |
Not Yet Wild
Join Date: Sep 2022
Posts: 2
|
ezgo st 4x4
Hi,,Does anyone know how to remove a front axle half shaft? I have peen trying with a slide weight puller but no go ,,Information on these things is hard to come by . Thanks in advance Dan
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2022, 08:52 AM | #2 |
Not Yet Wild
Join Date: Aug 2014
Location: Miami, FL
Posts: 49
|
Re: ezgo st 4x4
I would soak up with penetrant and heat up a bit.
|
09-28-2022, 09:48 AM | #3 |
Not Yet Wild
Join Date: Sep 2022
Posts: 2
|
Re: ezgo st 4x4
Humm thanks ,, I'll try that today , I have some pbblaster and a small mapp gas torch
|
10-05-2022, 09:24 PM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: ezgo st 4x4
Are there clips or pins inside the diff holding the axles in?
|
10-06-2022, 01:20 AM | #5 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,456
|
Re: ezgo st 4x4
https://www.manualslib.com/manual/21...Go-St-4x4.html
According to the manual you can pry it out with a bar. There should be a Hog ring holding it in place similar to most cars! "Remove the wheels. Remove the tie rod end. Tap off the control arm end from the steering knuckle.Remove the half shaft using pry bar to separate it from the front differential.The installation of the half shaft is the reverse of disassembly using new cotter pins and new hog rings." |