what model of EZ GO is this?

[dan2116]

Have a private sale of this Ez-Go gas cart that is stated to be a 2007 with a 350cc engine . I don't recognize the model with the front hood design. Listed low hours ( 50 ) for $2800. Sense there is no top did they make a top for it? Thought I would ask the pro's before the seller. Thanks for your help.
Dan2007 ezgo 2.jpg

2007 ezgo 3.jpg

2007 ezgo.jpg

[BrewCityMusic]

That's an ST350, basically a TXT frame and body with the Workhorse-style cowl, lowers, and the 350ci engine. They used that front cowl on the MPT's, Workhorses, etc as well as the Cushman Commanders and a couple of Jacobsen Models - the cowls can be freely swapped back and forth as long as You have the inner support for the front of the ST cowl.

Here's a pic of my new (as yet untouched) 2010 Workhorse/MPT - Being an MPT it has the metal body, dump bed, HD suspension, etc but take all that away, add a TXT rear body, and it's a very similar cart (pre-2010 had the 350cc also, although the ST's had the 36 degree standard clutch where the MPT/Workhorse had the Heavy-Duty 28 degree - mine is the new style with the 13hp Kawasaki Motor and new clutches/trans design)

[StoveBolt]

Originally Posted by dan2116

Sense there is no top did they make a top for it?

Yes, same as a TXT, might need different brackets in back because of the seat.

[BrewCityMusic]

A standard TXT top will fit right on, provided your front seats still have the original brackets - snap a pic between the backs of the seats and post it, but from pic 3 it looks like no troubles (the pic will help us confirm for You)

[dan2116]

Is there a big difference in weight between MPT/Workhorse models and the TXT. What make of engine and horsepower ( 350cc ) would be in this 2007 cart? Thank you guys for the help.

[beater cart]

EZGO Sport 2+2 model
That cart appears to have the three bolt steering and I would bet 06 or earlier model.
I also believe 2800 is a good price.

[kgsc]

Engine should be a Robbins 350 about 11 hp. Look for a serial tag on the frame rail under the seat either above the motor on the cross rail or in front of the motor. That will have model numbers plus year. If it runs good price was pretty good.