|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-16-2014, 05:15 PM | #1 |
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 432
|
Powerwise II charger relay assembly
Relay assembly needed,been reading some posts,part # is 603194,(kinda pricey)
Have heard regular powerwise board will work #28667g01,is this true? Please help,,,,,thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-17-2014, 06:29 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Powerwise II charger relay assembly
If you can get it to fit physically so it doesn't short out against anything, it ought to work.
All the control board in a ferroresonant transformer type charger does is switch the AC power to the transformer on and off. Has to see a battery pack voltage of about 30V to turn the charger on and when it sees and on-charge voltage in the 44 to 46 volt range, it turns the charger off, or if the on-charge voltage has not reached into the 44V-46V turn off point in about 16 hours, it will also turn the charger off. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Jumping charger relay | Electric Club Car | |||
Powerwise charger w/ Club Car round three prong charger plug HOT!! | Electric EZGO | |||
yamaha G1 starter relay assembly | Gas Yamaha | |||
48V Relay in Charger. Where to buy? | Electric Club Car | |||
powerwise relay p/n? | Electric EZGO |