backfiring

milltown · 08-27-2011, 06:16 PM

i adjusted my valves and changed the oil and now I get a little pop when you take your foot off the gas to come to a stop. Just wondering if there is anything that can be done to fix that or did I do something wrong on the valve adjustment? Thanks for the help guys.

milltown · 08-27-2011, 07:38 PM

I forgot to mention that I adjusted the governor to get some speed out of it too.

ez go go · 08-29-2011, 05:38 AM

You need to adjust the butterfly on the carb.... When you adjusted the governor, it probably moved it as well not letting it close all the way when you let off the accelerator. Adjust your linkage a little where it is on the stop with the pedal all the way up.

milltown · 08-29-2011, 07:26 AM

I may need some help with all of that!

camaroluvz28 · 08-29-2011, 09:17 AM

you can try is to take the screw out of the carb that doesnt allow the throttle to close all the way on the carb. if this screw is in to far it will cause the problem you discribed and it is not needed for this type of cart. it is an idle screw and these cars dont idle at a stop they only run when pedal is depressed.

milltown · 08-29-2011, 09:57 AM

Where is that screw at?

camaroluvz28 · 08-29-2011, 10:14 AM

there are two lines that attach to the carb....one is for the choke and the other is for the throttle. when you press on the accel pedal the throttle line will pull and you will be able to see the butterfly on top of the carb pulled pulled. when it goes back when you let off the accel the butterfly will close up against a small screw. this is the screw that is not neccessary for this cart, you can remove it.

milltown · 08-29-2011, 10:17 AM

ok, I will check it out

milltown · 09-01-2011, 09:24 PM

Is that the same screw that is talked about in this thread?
http://http://www.buggiesgonewild.co...ew-engine.html

08-27-2011, 06:16 PM	#1
milltown Getting Wild Join Date: May 2011 Location: South GA Posts: 110	backfiring i adjusted my valves and changed the oil and now I get a little pop when you take your foot off the gas to come to a stop. Just wondering if there is anything that can be done to fix that or did I do something wrong on the valve adjustment? Thanks for the help guys.

08-27-2011, 07:38 PM	#2
milltown Getting Wild Join Date: May 2011 Location: South GA Posts: 110	Re: backfiring I forgot to mention that I adjusted the governor to get some speed out of it too.

08-29-2011, 05:38 AM	#3
ez go go Doin' the Wild Thang Join Date: Mar 2010 Location: Greenville, AL Posts: 1,063	Re: backfiring You need to adjust the butterfly on the carb.... When you adjusted the governor, it probably moved it as well not letting it close all the way when you let off the accelerator. Adjust your linkage a little where it is on the stop with the pedal all the way up.

08-29-2011, 07:26 AM	#4
milltown Getting Wild Join Date: May 2011 Location: South GA Posts: 110	Re: backfiring I may need some help with all of that!

08-29-2011, 09:17 AM	#5
camaroluvz28 Gone Wild Join Date: Sep 2010 Location: Florida Posts: 1,895	Re: backfiring you can try is to take the screw out of the carb that doesnt allow the throttle to close all the way on the carb. if this screw is in to far it will cause the problem you discribed and it is not needed for this type of cart. it is an idle screw and these cars dont idle at a stop they only run when pedal is depressed.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-29-2011, 09:57 AM	#6
milltown Getting Wild Join Date: May 2011 Location: South GA Posts: 110	Re: backfiring Where is that screw at?

08-29-2011, 10:14 AM	#7
camaroluvz28 Gone Wild Join Date: Sep 2010 Location: Florida Posts: 1,895	Re: backfiring there are two lines that attach to the carb....one is for the choke and the other is for the throttle. when you press on the accel pedal the throttle line will pull and you will be able to see the butterfly on top of the carb pulled pulled. when it goes back when you let off the accel the butterfly will close up against a small screw. this is the screw that is not neccessary for this cart, you can remove it.

08-29-2011, 10:17 AM	#8
milltown Getting Wild Join Date: May 2011 Location: South GA Posts: 110	Re: backfiring ok, I will check it out

09-01-2011, 09:24 PM	#9
milltown Getting Wild Join Date: May 2011 Location: South GA Posts: 110	Re: backfiring Is that the same screw that is talked about in this thread? http://http://www.buggiesgonewild.co...ew-engine.html

Similar Threads
Thread	Forum
Still backfiring!	Gas Yamaha
G1 Backfiring	Gas Yamaha
G16 Backfiring!	Gas Yamaha
backfiring G9	Gas Yamaha
backfiring	Gas EZGO