|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-14-2013, 07:16 AM | #1 |
Not Yet Wild
Join Date: Jun 2012
Location: so. ill.
Posts: 25
|
G1 brakes not working. please help!!!
Just got a g1 and im not at all familiar with the brakes on it. They don't slow the cart at all and when I push brake pedal it goes straight to the floor without any resistance. Anyone tell me what the problem might be?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2013, 01:29 PM | #2 |
Not Yet Wild
Join Date: Sep 2013
Location: Mason Co, WA
Posts: 7
|
Re: G1 brakes not working. please help!!!
I'm in the same boat. Just got an 81 G1. Runs ok, but doesn't even try to stop when brakes applied.
Where's the best place to get new brakes? Does it matter if they are genuine Yamaha parts? Is it easier/better to just switch to disc brakes? |
10-06-2013, 02:47 PM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: G1 brakes not working. please help!!!
Under the pedals is a part of the floor that can be removed. Removing it will give you access to the brake cables. The adjustment is right there.
|
10-06-2013, 03:33 PM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: G1 brakes not working. please help!!!
Ditto! If that doesn't work, you need new brake shoes and/or drums. It is possible that there could be a problem with the cables.
|
10-07-2013, 01:07 AM | #5 |
Not Yet Wild
Join Date: Sep 2013
Location: Mason Co, WA
Posts: 7
|
Will take a look at that. Thank you.
|
10-07-2013, 09:28 AM | #6 |
Getting Wild
Join Date: Jul 2010
Posts: 117
|
Re: G1 brakes not working. please help!!!
G1 brakes had 2 different systems. 82 a later had self adjusting brakes. 81 and earlier brakes had adjusters on the back of the brake backing plates. If you adjust the brakes by the cable under the floor plate you are adjusting them wrong. First make sure the brake cables are good and the shoes and drums are good. Identify what year car you have. 81 and earlier can be easily adjusted. If you have an 82 and later you could have a problem.
|
10-09-2013, 11:24 PM | #7 |
Not Yet Wild
Join Date: Sep 2013
Location: Mason Co, WA
Posts: 7
|
Re: G1 brakes not working. please help!!!
Picked up a set of brakes, thanks again Smallblock.
Now, how do I get the axle out? Does it just come out with appropriate force? |
10-09-2013, 11:45 PM | #8 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G1 brakes not working. please help!!!
No, and you dont need to remove them to do the brake shoes. If you really need to remove axles, remove the 4 bolts holding the backing plate and retaining ring. Then, appropriate force will remove them.
|
10-10-2013, 06:05 PM | #9 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G1 brakes not working. please help!!!
Glad I could help bottom_gun. CGtech, I sold him the G8 backing plate's/new shoes and drums off Wilson after the Ausco disc brake upgrade. Since there self adjusting (his is a old 1980 style), I suggested just to take out the axles and install the whole backing plate assy.
|
10-11-2013, 12:33 PM | #10 |
Not Yet Wild
Join Date: Sep 2013
Location: Mason Co, WA
Posts: 7
|
Outstanding. Repair in progress.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Cushman brakes not working | Gas golf carts | |||
2008 Electric Precedent - Brakes barely working | Electric Club Car | |||
Dynamic brakes not working | Electric golf carts | |||
G1 brakes not working | Gas Yamaha | |||
g1 brakes not working at all | Gas Yamaha |