Yamaha G9 headlight question

[MudHog]

Originally Posted by G1-G9

Ok MudHog you have the light's in so where are the pic's?

The lights on the G22? They aren't functional and really just the housing in both cases. There is only one pigtail coming from the frame to the housing on the cart too. I can say that the pigtail from the housing goes to a main wire harness on the frame. There are no ground wires going to the frame under the front that I have noticed. From my research, with help from users here, my housings aren't used by Yamaha anymore and will be hard and expensive to get the bulb sockets for. When I get to getting the lights working, I will just go with a whole new kit and extend the harness due to the cart being a limo.


I'll gladly take pictures if needed though. Just let me know what would like to be seen.

[cgtech]

I have those lights on the shelf right now, what you need? At the minimum, i can get you all the part numbers.

[MudHog]

Originally Posted by cgtech

I have those lights on the shelf right now, what you need? At the minimum, i can get you all the part numbers.

My understanding is that it is not so much the housing, it is the plug and respective bulb socket that is not used anymore or is hard to get.

I'll follow up this evening with some pictures of mine to verify.

[MudHog]

Originally Posted by cgtech

I have those lights on the shelf right now, what you need? At the minimum, i can get you all the part numbers.

Pictures of back of housing and of plug that would plug into the bulb socket.