|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-26-2014, 06:58 PM | #1 |
Not Yet Wild
Join Date: May 2013
Posts: 9
|
lug stud spinning
went to remove a wheel on my g2 and one of the lug studs is just spinning. once i get the nut ground or chisled of do i have to remove the axel to replace the stud, or can it be done on the cart
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-27-2014, 07:31 AM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
Re: lug stud spinning
I would attempt to replace the stud without pulling the axle first. You should pretty much know with the wheel off if the axle needs to come off to replace the stud. Hopefully the spinning is caused by stripped splines on the stud knurls and not the axle knurls. If the axle knurls are bad you may need to tack weld the head of the new stud to the axle to prevent rotation. Good luck - RAY
|
06-27-2014, 02:12 PM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: lug stud spinning
Like always, Stick's got ya covered!!
|
07-01-2014, 06:13 PM | #4 |
Not Yet Wild
Join Date: May 2013
Posts: 9
|
Re: lug stud spinning
thanks guys, knowing my luck i|ll have to pull the axle and tack weld it
|
07-01-2014, 06:39 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: lug stud spinning
It's really easy to pull the axle if need be. Remove drum, there are 2 big holes in the flange that you can acsess the 4 12mm head bolts. Start with the holes at 1 and 7 o'clock then 5 and 11 o'clock. Remove the bolts and just tap out the axle. When I replace brake shoes on early Yamaha's, I always remove the axles and use one bolt to hold the backing plate in place. Don't worry, be happy
|
|
|
Similar Threads | ||||
Thread | Forum | |||
01 PDS Motor Spinning but NO Go | Electric EZGO | |||
4 Stud to 5 Stud Adaptors / Hubs | Design Center | |||
92 cc rear wheel stud spinning ?? | Electric Club Car | |||
Spinning Motor S1 stud | Electric Club Car | |||
how to get both wheels spinning | Gas EZGO |