lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-22-2018, 06:33 PM   #1
mattrourke
Getting Wild
 
Join Date: Jul 2013
Posts: 103
Default Yamaha G16 sway bar link.

I'm installing a new 6" lift in my G16 and in the process cutting out the 4" lift that the previous owner homemade and welded into place. He also just welded a new sway bar link to the frame so i have no idea where the stock one is supposed to sit.

Would someone be able to measure theirs for me maybe from the center of the tube frame to the center of the sway bar bolt holes. I guess i will have to estimate the angle.

Thanks!
Attached Images
File Type: jpg IMG_20181222_152824.jpg (195.4 KB, 0 views)
mattrourke is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-23-2018, 02:00 PM   #2
Dave in VA
maintaining a low profile
 
Dave in VA's Avatar
Yamaha
 
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 5,976
Default Re: Yamaha G16 sway bar link.

Do you have the correct panhard bar? JN6-F2172-00-00 I can get measurements tomorrow.

This is the economy 4" lift.

Dave in VA is online now   Reply With Quote
Old 12-23-2018, 07:39 PM   #3
raydhd
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 9,110
Default Re: Yamaha G16 sway bar link.

On my G14 with the 4" econo lift kit I welded a bracket on the passengers side to move the sway bar level across the cart. This keeps the whole rear end more centered for less of a bump steer effect. I tried all positions before welding in the final bracket.
raydhd is offline   Reply With Quote
Old 12-27-2018, 12:41 AM   #4
mattrourke
Getting Wild
 
Join Date: Jul 2013
Posts: 103
Default Re: Yamaha G16 sway bar link.

Thanks guys. I ended up taking a piece of flat bar and drilling 3 holes in it and welding it in as close to the stock angle and length as i could but it left me the ability to adjust it from one hole to another if i find it is not centred properly. Worst case, i plasma it off and weld in a new one.
mattrourke is offline   Reply With Quote
Old 08-07-2020, 06:49 AM   #5
mstriker250
Not Yet Wild
 
Join Date: Aug 2020
Posts: 1
Default Re: Yamaha G16 sway bar link.

Quote:
Originally Posted by raydhd View Post
On my G14 with the 4" econo lift kit I welded a bracket on the passengers side to move the sway bar level across the cart. This keeps the whole rear end more centered for less of a bump steer effect. I tried all positions before welding in the final bracket.
I also have the 4 lift on my G16 could possibly post a picture i have a lot of sway
Thanks
I'm a newbie
mstriker250 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Yamaha drive 6" lift body sway Electric Yamaha
2016 Yamaha sway problem Gas Yamaha
Newbie Needs Link For Yamaha G8/G9 Alignment Electric Yamaha
Yamaha rear 3 link set up? Lifted Golf Carts


All times are GMT -5. The time now is 05:25 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.