G1, no ignition switch

P-Z-GO · 07-01-2014, 09:50 PM

So, I picked up a g1 the other day, and it's rough, but it was free. Anyway, the ignition switch is broke, most of the guts are out of the switch. I have had atvs like this before, and usually a screw driver will do the job (temporarily anyways). Well, I have turned the switch every way possible, and I get nothing, and yes, the gas pedal is floored when I'm trying. I have a good 12.7 Volts at the battery, but I can't even get a solenoid to click. Does anyone know an easy way to hot-wire or jump the ignition? I'd like to hear it turn over or possibly even run before I get in too deep. She said it ran when it was parked, but who know how long ago that really was. Thanks a lot, Jp

Sent from my iPhone using Tapatalk

P-Z-GO · 07-01-2014, 09:51 PM

Btw, it's a 2 cycle!

Sent from my iPhone using Tapatalk

P-Z-GO · 07-02-2014, 08:51 PM

Glad I wasn't holding my breath! I figured it out.

Sent from my iPhone using Tapatalk

techman1954 · 07-02-2014, 10:09 PM

**** p-z go, just use jb weld or alumiloy , you think that fixes everything

P-Z-GO · 07-03-2014, 05:45 AM

Great reply techman! Actually, I alumilloyed the solenoid, and jb welded the throttle to wide open!!! Yeeeehaawww!

Sent from my iPhone using Tapatalk

07-01-2014, 09:50 PM	#1
P-Z-GO Getting Wild Join Date: Nov 2008 Location: Louisville Ky. Posts: 99	G1, no ignition switch So, I picked up a g1 the other day, and it's rough, but it was free. Anyway, the ignition switch is broke, most of the guts are out of the switch. I have had atvs like this before, and usually a screw driver will do the job (temporarily anyways). Well, I have turned the switch every way possible, and I get nothing, and yes, the gas pedal is floored when I'm trying. I have a good 12.7 Volts at the battery, but I can't even get a solenoid to click. Does anyone know an easy way to hot-wire or jump the ignition? I'd like to hear it turn over or possibly even run before I get in too deep. She said it ran when it was parked, but who know how long ago that really was. Thanks a lot, Jp Sent from my iPhone using Tapatalk

07-02-2014, 10:09 PM	#4
techman1954 Not Yet Wild Join Date: May 2014 Posts: 6	Re: G1, no ignition switch **** p-z go, just use jb weld or alumiloy , you think that fixes everything
techman1954 Not Yet Wild Join Date: May 2014 Posts: 6

Similar Threads
Thread	Forum
Key ignition switch	Gas Club Car
Yamaha G9-Ignition Coil & Ignition Switch-Help	Gas Yamaha
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP!	Gas Yamaha
Ignition switch fir B/S 20 hp	Big Block Talk!
New Ignition Switch	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-01-2014, 09:51 PM	#2
P-Z-GO Getting Wild Join Date: Nov 2008 Location: Louisville Ky. Posts: 99	Btw, it's a 2 cycle! Sent from my iPhone using Tapatalk

07-02-2014, 08:51 PM	#3
P-Z-GO Getting Wild Join Date: Nov 2008 Location: Louisville Ky. Posts: 99	Glad I wasn't holding my breath! I figured it out. Sent from my iPhone using Tapatalk

07-03-2014, 05:45 AM	#5
P-Z-GO Getting Wild Join Date: Nov 2008 Location: Louisville Ky. Posts: 99	Great reply techman! Actually, I alumilloyed the solenoid, and jb welded the throttle to wide open!!! Yeeeehaawww! Sent from my iPhone using Tapatalk