Running accessories on clone swap

[Mansonc]

Working on a 420 cc clone swap into an 88 gas marathon, and am trying to have enough juice to run a simple radio and street legal lighting. i know that the 420 predator motor has 1 charging coil putting out 3 amps, and another one can be added to make 6amps. i am figuring that is not going to be enough. i have not made a decision on the electronics yet to come up with a needed amperage yet but wondering what you guys have done to run accessories. starter/generator, alternator, sticking with charge coils.....? Sorry for the repeat question, beating a dead horse.

[raydhd]

See Shepard's 18 amp conversion in the clone section which I have bumped for you. Many of us use the carts stock S/G and some have added mini denzo alternators covered in a sticky in the clone section.

[Mansonc]

Originally Posted by raydhd

See Shepard's 18 amp conversion in the clone section which I have bumped for you. Many of us use the carts stock S/G and some have added mini denzo alternators covered in a sticky in the clone section.

Thank you i was able to find it. not sure what the fifference in flywheel is or if you could just get away with the charge coil

[raydhd]

The flywheel has 4 poles in it rather than 1 I would guess you need the whole system. Maybe Shepard will jump in here as he has done it.

[trig123]

Just wondering ? How are you going to use reverse with a clone engine ? Maybe I missed something but the 1988 came with a 2-stroke

[Mansonc]

Originally Posted by trig123

Just wondering ? How are you going to use reverse with a clone engine ? Maybe I missed something but the 1988 came with a 2-stroke

i am installing a forward reverse gearbox on it you can buy them off of ebay for about 130

https://www.ebay.com/itm/Universal-G...v4r-:rk:3:pf:0