Need help installing Alltrax XCT 48300 PDS 300

azTony · 03-10-2018, 06:15 PM

I have a friend that has a 2008 Precedent that is changing out his Curtis controller with an Alltrax XCT 48300 PDS 300. I have been searching Youtube and this site looking for pictures to give me ideas on how to mount and run all the wires. It said it was a plug and play operation but there are wires that have to be cut (4 pin connector on Curtis controller has no place to plug into Alltrax controller) so it is not plug and play. Any help would be GREATLY appreciated

Muddog · 03-10-2018, 06:31 PM

If You are talking about the square 4 pin molex plug, you will not use it.
That is to the programming port under dash.
Alltrax uses a different port for programming.

TahoeDawgZ71 · 03-10-2018, 08:46 PM

The Alltrax XCT is plug n' play for sure. However, you still have to get the correct controller. The XCT "PDS" is not going to work on a Precedent. The XCT-"IQ" is what you'll need for a Precedent. The XCT-PDS has an E-Z-Go connector on it and will not plug into the factory Club Car wiring.

azTony · 03-12-2018, 06:35 PM

Got it in, I just wrote what my buddy told me it was, it was the IQ is what we had.

Thanks!

TahoeDawgZ71 · 03-12-2018, 06:37 PM

I helped him through email. He told me it was running 23 MPH. Glad you guys got it figured out.

03-10-2018, 06:15 PM	#1
azTony Gone Wild Join Date: Jan 2013 Location: Sun Lakes, Arizona Posts: 610	Need help installing Alltrax XCT 48300 PDS 300 I have a friend that has a 2008 Precedent that is changing out his Curtis controller with an Alltrax XCT 48300 PDS 300. I have been searching Youtube and this site looking for pictures to give me ideas on how to mount and run all the wires. It said it was a plug and play operation but there are wires that have to be cut (4 pin connector on Curtis controller has no place to plug into Alltrax controller) so it is not plug and play. Any help would be GREATLY appreciated

03-10-2018, 06:31 PM	#2
Muddog Crazy Wild Join Date: Jun 2015 Location: Carolina Lowcountry Posts: 796	Re: Need help installing Alltrax XCT 48300 PDS 300 If You are talking about the square 4 pin molex plug, you will not use it. That is to the programming port under dash. Alltrax uses a different port for programming.

03-10-2018, 08:46 PM	#3
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Need help installing Alltrax XCT 48300 PDS 300 The Alltrax XCT is plug n' play for sure. However, you still have to get the correct controller. The XCT "PDS" is not going to work on a Precedent. The XCT-"IQ" is what you'll need for a Precedent. The XCT-PDS has an E-Z-Go connector on it and will not plug into the factory Club Car wiring.

03-12-2018, 06:35 PM	#4
azTony Gone Wild Join Date: Jan 2013 Location: Sun Lakes, Arizona Posts: 610	Re: Need help installing Alltrax XCT 48300 PDS 300 Got it in, I just wrote what my buddy told me it was, it was the IQ is what we had. Thanks!

03-12-2018, 06:37 PM	#5
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Need help installing Alltrax XCT 48300 PDS 300 I helped him through email. He told me it was running 23 MPH. Glad you guys got it figured out.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Installing Alltrax XCT speed controller	Electric EZGO
Alltrax SPM 48300 1 red 1 green error	Electric EZGO
Installing Alltrax controller	Electric Club Car
Alltrax SPM 48300 EZ 4 blink green	Electric EZGO
Installing Alltrax 400 and hd solenoid	Electric EZGO