OuterA-Arm bushing only replacement-2009 Precedent

[BNB1023]

Drivers side A-Arm outer bushing evidently completely gone, causing an occasional steering jerk on my 2009 CC Precedent. Although I have not taken the assembly apart yet, it appears that this is my only problem with the front end. I've seen several kits that include bushings for the whole front end, but I need to go the inexpensive route on this one, and hopefully only replace that bushing. Do any of the smaller front/rear/spring kits actually have the same size sleeve and rubber bushing that could be used on the outside control arm? Thanks.

[NoleFan4Ever]

Call David on Monday and see if he has just one (1) leftover from a kit or something and he will help you out.


Dave Hicks (TahoeDawgZ71) - Revolution Golf Cars (He's a site sponsor)
Phone: 706-836-7210 Email: info@revolutiongolfcars.com

[BNB1023]

Found the bushings local. Turns out they are used on several things, so went ahead and got them Thanks all.

[BNB1023]

Got the bushings, all ok now. FYI, if you have trouble getting them in, try putting a bolt with big washers on each end, and crank them in with a socket wrench. Make sure the washer hole is a little larger than the sleeve, works well.