|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-07-2018, 07:42 AM | #1 |
Not Yet Wild
Join Date: May 2015
Location: West Michigan
Posts: 52
|
How to remove these bolts? PIC
I have a rattle in my cart that I cant find and I want to take the pedal assembly out to see if that is it or not. If i bang on the floor I get a rattle noise. It happens when driving and I cant take it anymore. I can loosen these two bolts but I cant get them out? I don't want to break anything so I thought I would ask before I get out a pry bar. See pic.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2018, 04:32 PM | #2 |
Gone Wild
Join Date: Oct 2009
Location: Lee County, Georgia
Posts: 521
|
Re: How to remove these bolts? PIC
The two on the left side have a self taping bit on the end, the ones on the right don't. Keep turning them with up pressure.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Grade 8 Bolts vs. U-Bolts | Lifted Golf Carts | |||
83 club car FNR cable contacts... How to remove bolts | Electric Club Car | |||
u bolts | Lifted Golf Carts | |||
Speed control moutning plate/heatsink - remove broken bolts? | Electric EZGO | |||
What thread bolts needed to remove rear clutch? | Gas Yamaha |