lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-14-2022, 01:52 PM   #11
__JAG__
Getting Wild
 
Join Date: Apr 2022
Posts: 121
Default Re: Wiring Diagram

Quote:
Originally Posted by Richigou27 View Post
I was able to get my hands on it. I worked on mapping the wires from the 35 to the 23 pin. I was able to map everything but 4 wires.

The 23 pin diagram Clearly shows the motor heat sensors, but not in the 35 pin diagram. Most of it is in Chinese.

Im trying to figure out where the grey wires go.

Let me know if you guys have any thoughts on this.
Wish this showed a little more detail. Or I could find a manual specific to the controller. I'd like to wire in a high/low speed switch. But have not found anything on the pinout detail for the controller.
__JAG__ is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-18-2022, 10:09 AM   #12
drrogers
Not Yet Wild
 
Join Date: May 2022
Posts: 11
Default Re: Wiring Diagram

Hmm, looks like this diagram could be useful. Thanks.
drrogers is offline   Reply With Quote
Old 05-20-2022, 07:30 AM   #13
derelicte
Gone Wild
 
Join Date: Apr 2022
Posts: 197
Default Re: Wiring Diagram

Any idea how the 2022 speedometer on the dash gets the speed? I can't find a wire in any of the wiring diagrams that goes directly from the controller to the cluster. There appears to be one for the older controller on pin 12.

Obviously there must be a wire, but I can't find it documented anywhere.
derelicte is offline   Reply With Quote
Old 05-20-2022, 07:51 AM   #14
KRAZYMATT
Gone Wild
Club Car
 
Join Date: Aug 2010
Location: Central Florida
Posts: 1,485
Default Re: Wiring Diagram

Quote:
Originally Posted by derelicte View Post
Any idea how the 2022 speedometer on the dash gets the speed? I can't find a wire in any of the wiring diagrams that goes directly from the controller to the cluster. There appears to be one for the older controller on pin 12.

Obviously there must be a wire, but I can't find it documented anywhere.
The signal to the speedometer is also on pin 12 for the new controller.
Pin 12 - Coil4- COIL output 4-(speed pulse output)
KRAZYMATT is online now   Reply With Quote
Old 05-20-2022, 08:18 AM   #15
derelicte
Gone Wild
 
Join Date: Apr 2022
Posts: 197
Default Re: Wiring Diagram

Quote:
Originally Posted by KRAZYMATT View Post
The signal to the speedometer is also on pin 12 for the new controller.
Pin 12 - Coil4- COIL output 4-(speed pulse output)
Interesting. The wiring diagrams I have printed out don't have a pin 12 in the 24 pin connector. These are the wiring diagrams on page 1 of this thread.

Do you have a better/different wiring diagram?
derelicte is offline   Reply With Quote
Old 05-21-2022, 02:40 PM   #16
derelicte
Gone Wild
 
Join Date: Apr 2022
Posts: 197
Default Re: Wiring Diagram

There is one final mystery connector I'd love to figure out. On some of the wiring diagrams it is labeled drive. It is a 4 pin connector about 6" from the controller box just hanging above the motor. There is nothing plugged into mine. I have a '22 with the new controller.

Anyone know what is connector is for?
derelicte is offline   Reply With Quote
Old 07-23-2022, 10:51 PM   #17
jstjohnz
Not Yet Wild
 
Join Date: Jun 2022
Posts: 18
Default Re: Wiring Diagram

I am curious about the drive connector also. I think it may be an analog signal to the controller, maybe for a temperature sensor.

Some questions I have:

Any idea what GENERATRIX is?

The RED wire on the 3-pin DC-DC converter, is that +Batt from ignition switch to tell converter to turn on?
jstjohnz is offline   Reply With Quote
Old 07-23-2022, 10:54 PM   #18
jstjohnz
Not Yet Wild
 
Join Date: Jun 2022
Posts: 18
Default Re: Wiring Diagram

Quote:
Originally Posted by KRAZYMATT View Post
The signal to the speedometer is also on pin 12 for the new controller.
Pin 12 - Coil4- COIL output 4-(speed pulse output)
Is that pin definition from a data sheet for the controller? If so do you have a link?
jstjohnz is offline   Reply With Quote
Old 07-24-2022, 07:04 AM   #19
derelicte
Gone Wild
 
Join Date: Apr 2022
Posts: 197
Default Re: Wiring Diagram

Quote:
Originally Posted by jstjohnz View Post
The RED wire on the 3-pin DC-DC converter, is that +Batt from ignition switch to tell converter to turn on?
Yes.
derelicte is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Thread Tools
Display Modes


Similar Threads
Thread Forum
wiring diagram Electric Club Car
wiring diagram Electric EZGO
Gas par car wiring diagram Test Post
Wiring diagram Electric EZGO
wiring diagram Electric Club Car


All times are GMT -5. The time now is 12:09 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.