11-22-2021, 05:17 PM | #1 |
Getting Wild
Join Date: Sep 2021
Location: Port st Lucie Florida
Posts: 81
|
Victron shunt help
Trying to install the Victron shunt . Confused about cable placement on the shunt the negative side of the battery has a cable that goes to the controller and a cable that goes to the second battery also negative.
Do I place the cable going to the controller on the load side or negative side of the shunt ? And where do I place the cable that goes to the second battery ? I know I need to add a new cable that goes from the shunt to the negative side of the first battery I removed the cables from. Hopefully I explained this correctly Thank you |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-22-2021, 06:46 PM | #2 |
Gone Wild
Join Date: Oct 2012
Location: SoCal
Posts: 671
|
Re: Victron shunt help
Just watch the product video here - https://www.amazon.com/Victron-Smart...0856PHNLX?th=1
It explains it pretty well with pictures too. |
11-22-2021, 09:38 PM | #3 | |
Getting Wild
Join Date: Sep 2021
Location: Port st Lucie Florida
Posts: 81
|
Re: Victron shunt help
Quote:
I think I have it right now the controller cable is the load side than the cable that goes to the rest of the batteries is the Battery only side of the shunt plus I need another cable from the battery only side of the shunt to the first battery Negative side . I need to change the ends for the larger size loops for the shunt Thank you again |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Victron BMV-712 and 48v Evolution | Lithium Club Car | |||
Victron BMV700/702/712 Settings | Electric Club Car | |||
BVM-700 shunt bad.... | Electric EZGO | |||
Battery Monitor - Victron BMV 712 | Lithium Club Car | |||
Shunt | Extreme DC! |