03-28-2015, 08:00 PM | #1 |
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Compression
I have good to a little cylinder head compression on my 1997 FE290.....I need to find out if I can get .05 or .010 over sized piston rings.i don't want to bore it out or sleeve it...so where can I get them.or do they make them.im just going to hone the piston cylinder as I have done on lawn mowers and worked well they still running after 4 years...so help me out
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-28-2015, 08:20 PM | #2 |
Gone Wild
Join Date: Sep 2013
Posts: 152
|
Re: Compression
Not likely you'll find oversize rings. You would have too much piston skirt to cylinder gap and the piston would slap and rattle in the bore. That can cause your skirt to crack.
|
03-28-2015, 08:21 PM | #3 |
Gone Wild
Join Date: Sep 2013
Posts: 152
|
Re: Compression
Do a light hone and get new std size rings. Might get ya there. Also get some lapping compound and lap your valves in. Redneck rebuild
|
03-29-2015, 10:55 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Compression
101646101, 101646102, and 101646103.
Standard rings, .25MM Oversized Rings, and .50MM Oversized Rings Yes, they're still available. |
03-30-2015, 12:43 AM | #5 |
Gone Wild
Join Date: Sep 2013
Posts: 152
|
Re: Compression
Well I'll be damned. I stand corrected! Sorry about that
|
03-30-2015, 10:00 AM | #6 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Compression
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
compression | Gas Club Car | |||
EZ GO 30 psi compression | Gas EZGO | |||
compression | Gas Club Car | |||
need help on compression | Gas EZGO | |||
G-1 Low compression | Gas Yamaha |