|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-07-2009, 11:33 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Location: Carthage, TX
Posts: 17
|
96 ezgo dcs reverse but no forward
I have a 96 ezgo dcs that will not go forward. Reverse works but with no buzzer. I have done all of the tests from studmonkey, but I am not sure what to do if a test fails. On #4 the solenoid clicks but I only have 30 volts at the green wire. What does this mean? I have tested the motor and it works in both directions. I also read that I should have continuity between F1 and F2 when disconnected from the motor. Is this true? If so, what does it mean if I don't? This is my first post, I hope I have followed the directions correctly.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-07-2009, 11:42 PM | #2 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: 96 ezgo dcs reverse but no forward
Hello David124 and Welcome to the forum.
Someone will be along soon to help. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO runs in reverse, not forward | Gas EZGO | |||
Problems with 84 ezgo gasser wont go forward or reverse! | Gas EZGO | |||
EZGO Freedom hesitates when switching into forward or reverse....solenoid? | Electric EZGO | |||
1994 Ezgo electric runs great in reverse but does not forward | Electric EZGO | |||
Mid 90 EZGO will reverse but not go forward | Electric EZGO |