|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-04-2013, 08:03 PM
|
#21 |
|
Gone Wild
Join Date: Aug 2013
Location: Daytona Beach, Florida
Posts: 173
|
Re: Need less torque....
My controller is from D&D and is a 500 amp unit although I do not see a model number. The cart is a 2006 TXT PDS, 36 volts. I would not have a clue as to how to re-program, if it's possible perhaps someone can forward a link explaining how to do it?
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-05-2013, 05:01 AM
|
#22 |
|
Gone Wild
 Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Need less torque....
D&D doesn't make controllers, only motors. They certainly sell controllers. It's most likely a Curtis and you didn't see a model number because the sticker is on the lower end of the controller and once mounted is nearly impossible to see without a mirror (hint, hint).
As for programming instructions, you HAVE to know what you got before anyone can advise you from here on out. If in doubt call D&D, they sold the equipment and can offer advise/instructions. |
|
|
|
|
12-05-2013, 07:51 AM
|
#23 | |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Need less torque....
Quote:
|
|
|
|
|
|
12-05-2013, 05:00 PM
|
#24 |
|
Gone Wild
Join Date: Aug 2013
Location: Daytona Beach, Florida
Posts: 173
|
Re: Need less torque....
I will be checking when I get home this evening
|
|
|
|
|
12-05-2013, 07:35 PM
|
#25 |
|
Gone Wild
Join Date: Aug 2013
Location: Daytona Beach, Florida
Posts: 173
|
Re: Need less torque....
600 amp controller. Model # DCX600R6
I believe it may be an Alltrax |
|
|
|
|
12-05-2013, 08:47 PM
|
#26 |
|
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Need less torque....
Good news, your DCX600 is programmable. Bad news you need a laptop and a special cable. Here's the Alltrax programmer software website with instructions.
http://www.alltraxinc.com/Products_ControllerPro.html |
|
|
|
|
12-05-2013, 09:23 PM
|
#27 | |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Need less torque....
Quote:
 |
|
|
|
|
|
12-05-2013, 10:17 PM
|
#28 |
|
Gone Wild
Join Date: Aug 2013
Location: Daytona Beach, Florida
Posts: 173
|
Re: Need less torque....
Hey Jake,
If I get a long enough cable, maybe you can program it for me from your computer  |
|
|
|
|
12-06-2013, 08:09 AM
|
#29 |
|
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Need less torque....
USB is limited to 15 feet max without repeaters. You could move the desktop to the garage or driveway if need be.
|
|
|
|
|
12-06-2013, 08:53 AM
|
#30 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Need less torque....
I have seen it done with the usb cable running out the window.... but that can lead to some disastrous results if the cart is not on jack stands
Maybe you can call around to the local shops and find somebody to do it for you. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New D&D Torque Motor (4:1) - Not Seeing 40% Torque | Electric EZGO | |||
| EZ-GO torque | Gas EZGO | |||
| D&D Speed&Torque vs. D&D High Torque | Electric EZGO | |||
| Torque for PDS | Electric EZGO | |||
| Electric Torque vs Gas Torque | Electric Club Car | |||
Linear Mode
