|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-27-2010, 08:10 AM | #11 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: 4 stroke HEI Conversion
Well, seeing as how all the electrical stuff in my cart is all original ('96) and ive been wanting to give it a little something. I think im going by the parts store on the way home.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-27-2010, 12:22 PM | #12 |
Not Yet Wild
Join Date: Jun 2009
Location: TN
Posts: 45
|
Re: 4 stroke HEI Conversion
|
12-23-2010, 06:15 PM | #13 |
Not Yet Wild
Join Date: Jun 2009
Location: TN
Posts: 45
|
Re: 4 stroke HEI Conversion
Below is the Accel coil mentioned above mounted on my 98 ST350. It has a Red MSD base that solves the primary wiring attachment problem on the bottom of the coil.
I'm still having trouble getting the 4 wire HEI Ignition module to work though. It will run but only at high RPMs and rough at that. I have tried swapping the pulser coil wires and took the module to Autozone to confirm its good. Any ideas on this would be appreciated. I may redraw the diagram above for a 4 Stroke to make sure I'm not missing something. |
12-24-2010, 11:47 AM | #14 |
Not Yet Wild
Join Date: Dec 2010
Location: Minneapolis, Kansas
Posts: 66
|
Re: 4 stroke HEI Conversion
MC Footer when I looked up the accel coil # at advanceautoparts it didn't show the red msd base with it. Did you find that somewhere else?
BrewCity I like the price for $40 for coil and hei, but where did you find that? Places I have checked your looking at $40 for the coil and $50 for the hei. Just wondering, cause it looked like a good investment to purchase. Last edited by 98 EZGO; 12-24-2010 at 11:48 AM.. Reason: fixed wording |
12-24-2010, 01:27 PM | #15 | |
Not Yet Wild
Join Date: Jun 2009
Location: TN
Posts: 45
|
Re: 4 stroke HEI Conversion
Quote:
The MSD part# 8871 is called a coil stacker and is purchased seperately. I'm sure Accel and others have a similar part. http://nvautosports.com/msd/msd_igni...1/i-99383.aspx The place to get these components at a good price is on ebay. Some are open box returns and such but priced much better than retail. I got some of my stuff from "bertman34436" and I would buy from him again... great guy to deal with. http://stores.ebay.com/sparks-and-stuff |
|
12-24-2010, 03:17 PM | #16 |
Not Yet Wild
Join Date: Dec 2010
Location: Minneapolis, Kansas
Posts: 66
|
Re: 4 stroke HEI Conversion
Thanks for your help MC Footer. I will check into that. Still have some time before santa comes!
|
12-24-2010, 03:56 PM | #17 |
Not Yet Wild
Join Date: Jun 2009
Location: TN
Posts: 45
|
Re: 4 stroke HEI Conversion
This is what I have wired up but having some trouble with. I'll call the 4 Stroke Diagram a Draft at this time as I may have missed something. If you can tell me what that is I will be glad to try it and update the Diagram.
I know the Pulser coil wires may need to be swapped but I have tried both ways and neither is working well for me .... Thanks, Mike |
12-28-2010, 10:11 AM | #18 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: 4 stroke HEI Conversion
Sorry about the delay getting back, we're in our busy season and not a lot of time for web stuff ...
The coil I used for the 2-stroke conversion was off Ebay, but I searched it again and it looks like they no longer have them available - this link however is from a buddy of mine who used this universal coil on his '89 Marathon (it bears a striking resemblance to mine however the one I got is completely enclosed, magnet and all): http://cgi.ebay.com/ebaymotors/Emgo-...item45f7ae757b This coil, BTW is only suitable for the 2-stroke conversion, and as a bonus has a plug wire already attached - As to the HEI, the Accel modules are all over for that $18-24 price online, or a generic equivalent at NAPA is like $26 |
01-15-2011, 12:41 AM | #19 |
Not Yet Wild
Join Date: Jun 2009
Location: TN
Posts: 45
|
Re: 4 stroke HEI Conversion
BTT
Still haven't gotten this 4 Stroke HEI module to work. If anyone has wired up a GM HEI module on a 4 Stroke and could compare theirs to the diagram above I would appreciate it.... Thanks, Mike |
01-26-2011, 01:24 PM | #20 |
Getting Wild
Join Date: Jun 2010
Location: Occupied South
Posts: 143
|
Re: 4 stroke HEI Conversion
Another place to look for coils would be in the Harley market. They use a twin tower coil that will be smaller & easier to mount. Price will be about right as well.
They are available in different ohm values for different models/years; there may be some optimizing available with a different primary resistance. That diagram looks right to me. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2 Stroke into 4 stroke conversion | Big Block Talk! | |||
help is my cart 2 stroke or 4 stroke? | Gas Club Car | |||
88 ezgo 2 stroke convert to 4 stroke | Gas EZGO | |||
can i use 2 stroke ezgo clutch on 4 stroke | Big Block Talk! | |||
Easy: 4-Stroke vs 2-Stroke | Gas Club Car |