|
11-27-2015, 11:12 PM
|
#11 |
|
Not Yet Wild
Join Date: Jan 2014
Location: lake geneva wi area
Posts: 52
|
I meant to say lathe didn't check my spelling
Sent from my SCH-R970 using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-27-2015, 11:23 PM
|
#12 | |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 15,130
|
Re: Governor
Quote:
and the rear is the driven (secondary) clutch... (low end torque) Now... machining the driven (rear) clutch will get you the torque that you'll need to push a race car, How it's done??? I don't know!  Cart Parts Plus has been machining most of BGW members driven clutches for years, I understand that you have the tools to do it yourself.... but I just don't know how it's done!  |
|
|
|
|
11-27-2015, 11:34 PM
|
#13 |
|
Not Yet Wild
Join Date: Jan 2014
Location: lake geneva wi area
Posts: 52
|
I know which clutch is which I was just mistaken on which way it was in my mind yes the primary is on the engine and if you make the clutches on the secondary smaller it'll give you more low end torque you were right
Sent from my SCH-R970 using Tapatalk |
|
|
|
|
11-27-2015, 11:42 PM
|
#14 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 15,130
|
Re: Governor
Okay... So now... what's your goal?
Ample torque to push the race car? Or... Race the race car?  (sorry... I just had too!) |
|
|
|
|
11-27-2015, 11:45 PM
|
#15 |
|
Not Yet Wild
Join Date: Jan 2014
Location: lake geneva wi area
Posts: 52
|
Yes you have a point but when we push the car I don't want to be the last one on the return road but its not bad to have the fastest car and the slowest cart
Sent from my SCH-R970 using Tapatalk |
|
|
|
|
11-27-2015, 11:59 PM
|
#16 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 15,130
|
Re: Governor
I understand!  Next question... would you consider upgrading your engine and throwing a bit of extra money into your cart? If so... all I can think of is a V-twin... then you can have the best of both worlds!  |
|
|
|
|
11-29-2015, 10:40 PM
|
#17 |
|
Not Yet Wild
Join Date: Jan 2014
Location: lake geneva wi area
Posts: 52
|
I just got your reply Sunday night and we will have to try to push the race car at least one time with this and see how we like it if not we think we are going to go with the V twin maybe I could take the motor out of my VTX 1300 that would be cool
Sent from my SCH-R970 using Tapatalk |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G14 Governor | Gas Yamaha | |||
| Governor | Gas EZGO | |||
| G16 Governor | Gas Yamaha | |||
| re-set the governor | Gas EZGO | |||
| governor | Gas Club Car | |||
Linear Mode
