|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-16-2022, 09:14 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2022
Location: Pine Mountain Club, CA
Posts: 15
|
Can a 3 pin rocker FnR switch be wired to replace a DCS FnR lever?
Hi all,
Wondering if I can replace my DCS lever with a 3pin rocker like on an EZgo PDS. I know it can be done with a 6 pin but I’m having trouble finding them with housing. The three pin ones all come right on a plate with key switch, lights and phone charger. I can always pop out the FnR switch and put a secondary light switch there but if I could make it work I would like to keep it all right there. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-17-2022, 08:12 AM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,247
|
Re: Can a 3 pin rocker FnR switch be wired to replace a DCS FnR lever?
Look for the club car switch and housing. It has the 6 pins. If you just want a toggle go to an auto parts store. DPDT switch.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Changing keyed Forward/reverse switch to rocker switch | Electric EZGO | |||
| Wiring F/R rocker switch to replace bell type | Electric Club Car | |||
| 99 club car 48 volt has rocker switch with diag plug hole in bottom of switch | Electric Club Car | |||
| Light switch wired to ignition | Gas EZGO | |||
| '84 Marathon,lights wired into switch? | Electric EZGO | |||
Linear Mode
