|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
10-10-2012, 10:19 PM
|
#11 |
|
Getting Wild
Join Date: Jun 2012
Location: Sumter, SC
Posts: 111
|
Re: 95 Club Car 48 volt with stock curtis controller
There is a three wire plug coming off the OBC. Run a jumper from the yellow wire to the solenoid. If it works then your OBC suspect.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-10-2012, 10:21 PM
|
#12 |
|
Getting Wild
Join Date: Jun 2012
Location: Sumter, SC
Posts: 111
|
Re: 95 Club Car 48 volt with stock curtis controller
Sorry. Run that jumper from the yellow wire to the B- on the controller
|
|
|
|
|
10-10-2012, 10:23 PM
|
#13 |
|
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
Re: 95 Club Car 48 volt with stock curtis controller
Thanks John: I will try that tomorrow. This is only my second Club Car. Prefer the Yamaha line. Currently have a G19e.
|
|
|
|
|
10-10-2012, 10:25 PM
|
#14 |
|
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
Re: 95 Club Car 48 volt with stock curtis controller
That is where I have the jumper now. It runs fine with the jumper in place
|
|
|
|
|
10-10-2012, 10:25 PM
|
#15 |
|
Getting Wild
Join Date: Jun 2012
Location: Sumter, SC
Posts: 111
|
Re: 95 Club Car 48 volt with stock curtis controller
Yes sir. I can't take credit for that info though, had a buddy walk me through eliminating the OBC. That yellow wire is the only one still needed after taking the OBC out.
|
|
|
|
|
10-10-2012, 10:28 PM
|
#16 |
|
Getting Wild
Join Date: Jun 2012
Location: Sumter, SC
Posts: 111
|
Re: 95 Club Car 48 volt with stock curtis controller
Ah that's kinda what I figured after reading your post again. Your best bet is to eliminate the OBC, sell your stock charger and get a GDI stand alone charger. I got a very good deal on mine if you want that information.
|
|
|
|
|
10-10-2012, 10:30 PM
|
#17 |
|
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
Re: 95 Club Car 48 volt with stock curtis controller
Last after market I bought was from DPI in Tenn. Cost me about $325
|
|
|
|
|
10-10-2012, 10:35 PM
|
#18 |
|
Getting Wild
Join Date: Jun 2012
Location: Sumter, SC
Posts: 111
|
Re: 95 Club Car 48 volt with stock curtis controller
Meant DPI. Man I need to go to bed
|
|
|
|
|
10-11-2012, 10:55 PM
|
#19 |
|
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
Re: 95 Club Car 48 volt with stock curtis controller
Confirmed that OBC is toast. Hooked up charger today and would not charge. Back of OBC (Toward the front of the cart) has a big blister and it is all black under the blister
|
|
|
|
|
10-11-2012, 10:58 PM
|
#20 |
|
Getting Wild
Join Date: Jun 2012
Location: Sumter, SC
Posts: 111
|
Re: 95 Club Car 48 volt with stock curtis controller
Just look at it as a time to upgrade!
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Upgrading stock Curtis PDS 275 amp controller to 400 amp | Electric EZGO | |||
| stock CC curtis controller | Golf Carts and Parts | |||
| 04 Club Car Stock Curtis Controller and Motor | Golf Carts and Parts | |||
| Stock Curtis Controller | Golf Carts and Parts | |||
| 1996 Club Car 48 volt Used Stock Controller | Golf Carts and Parts | |||
Linear Mode
