![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#11 | |
****tard supreme
![]() ![]() Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#12 |
Sometime's............
![]() ![]() Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,696
|
![]() |
![]() |
![]() |
![]() |
#13 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 71,325
|
![]() |
![]() |
![]() |
![]() |
#14 |
Sometime's............
![]() ![]() Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,696
|
![]() |
![]() |
![]() |
![]() |
#15 |
Gone Wild
![]() Join Date: Jul 2009
Location: Sand Springs,Ok
Posts: 873
|
![]() I sometimes wonder about you guys!
|
![]() |
![]() |
![]() |
#16 |
Not Yet Wild
![]() Join Date: Sep 2009
Location: huffman,tx
Posts: 23
|
![]() ok if the g2 and g9 are the same motor can i use a g9 wiring harness on a g2 motor to get rid of the rev limitor
|
![]() |
![]() |
![]() |
#17 |
Sometime's............
![]() ![]() Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,696
|
![]() Yes, You will need the wireharness, the G9-"TCI/ignitor" and the G9-automatic voltage regulator. My peebrain is trying to think of anything else...no that should do it.
|
![]() |
![]() |
![]() |
#18 |
Gone Wild
![]() ![]() Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
|
![]() Good info Dave...btw,I'm back in Texas.Wish I were closer cause I'm in need of your help again.I loaned my Yami to a friend...he ran it out of oil..Now I have a knocking engine.
Is there such a thing as a crank kit...like a car? Is there a manual showing the engine breakdown an specs? Should I start a new thread for this? G2 gas |
![]() |
![]() |
![]() |
#19 |
Gone Wild
![]() ![]() Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
|
![]() Is a G1 crank kit the same for a G2?
|
![]() |
![]() |
![]() |
#20 |
Admin/Moderator
![]() ![]() Join Date: Dec 2006
Location: Ohio
Posts: 17,146
|
![]() |
Ron
![]() PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Swapping out (upgrading) an EZ-GO Electric Motor | Electric EZGO | |||
Header on V engines | Big Block Talk! | |||
swapping newer powerplant into older cart | Electric EZGO | |||
Small Engines | Golf Cart Parts |