|
10-25-2008, 07:17 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 12
|
brakes
I have been following the post on how to change the brakes on a 93 ezgo and need to find out how to get the nut loosened from the axle. I am having a hard time with this. Any help is appreciated.
-Jason |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-25-2008, 07:28 PM
|
#2 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: brakes
What I do first is leave the tire on it and lock the brakes down good. If you have air use a air gun if not you have to use good old elbow grease. Try spraying the nut down with some pentrating oil also.
OK if this doesn't work jack wheel up take it off and get as long of pry bar as you can and slip it between the studs on the hub and try to break it loose. This works well also but be careful not to tear the threads up on the stud. |
|
|
|
|
10-25-2008, 07:43 PM
|
#3 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 12
|
Re: brakes
Thank you Andy, I will try this tomorrow
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| brakes | Gas EZGO | |||
| brakes | Electric Club Car | |||
| bad brakes | Electric EZGO | |||
| New Brakes | Members Rides | |||
| Brakes? | Lifted Golf Carts | |||
Linear Mode
