2016 RXV Eco DC-DC converter wiring question

[Sdaigle83]

Hi All,

I'm elbows deep in an ECO conversion and ran into a question regarding the wiring for the new DC-DC converter. I removed the old converter which had a 6 pin plug receptacle. The new converter from Eco just has wires coming out of it. An orange that goes to the key, a black and a yellow with terminals that connect to the + and - of the battery, and a red a black that go to 12v accessories like lights/speakers.

How do I tie the new black and red wires (12v accessories) into the old harness? What about the other wires from that old connection.

I have attached a youtube link. At 9:35, he mentions "your model may vary" and you can see him attaching Spade Connectors to the red and black wires, but doesnt say where the other side of the connectors are going to.

New member, so I can post links yet. just add the w w w to the link. Any help would be appreciated. Thanks all!

youtube.com/watch?v=z5-n40sUx1E

[TheCartBoy]

Unless the factory DC DC converter is dead, just keep using it.

[Cobra,1]

What Cart Boy said.
Use existing factory converter.
When I upgraded I retained original convertor that came factory installed from EZ Go.
Same convertor shown in your pictures. 😊

[Sdaigle83]

Thanks! I kept the original converter installed and it runs great.