01-21-2022, 11:11 AM | #1 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
G2 Lifan swap
getting ready to swap my 32 yr old engine in my G2 with Lifan 15hp, need to know is there a cheaper pulley behind the comet clutch other than one from vegas, as i am going to use original starting system. The other help i will need is the exhaust what muffler and exhaust pipe options do i have. I do want to keep it quite as possible and dont want to use flex pipe. Thank all will be posting pics soon
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-21-2022, 12:02 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: G2 Lifan swap
Lots of ideas from many people in my "clone exhaust" thread. An often used solution is the VC header with the Walker 18192 muffler behind it.
|
01-22-2022, 07:08 AM | #3 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G2 Lifan swap
thanks i will be checking out the thread. I did look on VC and there header says only GX390 not sure will work on Lifan
|
01-22-2022, 09:07 AM | #4 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: G2 Lifan swap
The last I seen most of the clones still had the exhaust port at roughly 90 degrees off the cylinder head. The main exception to the was some Duromax's with the port at roughly 60 degrees off the cylinder head. The hemi was also off to some extent. IF you have the lifan already it easy enough to check.
|
01-22-2022, 01:44 PM | #5 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G2 Lifan swap
ok yes it is 90 degrees thank you
|
02-08-2022, 09:36 AM | #6 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G2 Lifan swap
started my swap should the engine set level or is ok thats angled down toward the rear. I can lift rear of mounting plate 1 1/2 inch and will level out
|
02-08-2022, 10:15 AM | #7 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: G2 Lifan swap
Mine sets down towards the back of the cart due to my 4" lift. Maybe when I install the Omega engine I will correct this BUT it has been this way since 2014. That being said IF you can level the engine there is no reason not to.
|
02-08-2022, 11:18 AM | #8 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G2 Lifan swap
great thank you. another issue is fuel pump how to hook all the lines or is there a diagram using the old tank mounted one
|
02-08-2022, 11:59 AM | #9 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: G2 Lifan swap
Vegascarts in their installation guides has info with drawings and pics of the fuel pump hookup
|
02-10-2022, 07:21 AM | #10 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G2 Lifan swap
another question what do i do for a air cleaner
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Lifan 420 Swap | Clone Engine Swaps | |||
LIFAN Swap | Clone Engine Swaps | |||
Lifan swap, can't lower my rpm's | Clone Engine Swaps | |||
Lifan 420 swap, help pls | Clone Engine Swaps | |||
Lifan 420 Swap | Clone Engine Swaps |