|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
|
|
08-06-2010, 09:29 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2010
Location: Vancouver WA
Posts: 7
|
club car starter/generator
we fried the starter generator on our club car. we found the cable from terminal A1 to the frame to be loose at the terminal and the wire had all the insulation melted off. the starter is fried inside and will have to be replaced. could a loose connection be the cause???? the starter is wired as follows. F1 to A2, A1 to frame. Yellow wire on the top goes to the regulater. Thanks for any help you can give.
|
|
|
|
08-06-2010, 09:52 PM
|
#2 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: club car starter/generator
You would get more answers in the club car section---
 This is the EZGO section |
|
|
|
|
08-06-2010, 10:07 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2010
Location: Vancouver WA
Posts: 7
|
Re: club car starter/generator
thanks, i think the starter gen. is same in either one. but will go there.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| club car starter/generator | Gas Club Car | |||
| club car starter/generator | Test Post | |||
| 2001 club car starter generator | Gas Club Car | |||
| 92 DS gas Club Car Starter generator | Gas Club Car | |||
| Club Car Starter Generator | Golf Carts and Parts | |||
Hybrid Mode