|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-20-2019, 09:09 PM | #1 |
Not Yet Wild
Join Date: May 2014
Posts: 10
|
Can't see "speed sensor" reading on Alltrax controller
Kind of stymied here. Installed Alltrax XCT controller, big solenoid, and all 48 volt upgrades on TXT. Everything fires up and works fine. And GREAT acceleration out of the new motor and controller. But very quickly reaches it's peak and no more. Maybe 10-12 mph.
Figured that the motor RPMs may not be right, so hooked up to the laptop. Can see all readings except the speed sensor. It doesn't show up. So not real sure what my next move is. Suggestions? Thanks all. AJ |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-20-2019, 09:51 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Can't see "speed sensor" reading on Alltrax controller
Was your prior controller a DCX? Have you pulled the sensor of the end of the motor to verify the magnet isn't broken?
|
01-21-2019, 06:49 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Can't see "speed sensor" reading on Alltrax controller
Is the TXT a DCS or Series drive?
These 2 controllers have no speed limiting options. |
Tags |
alltrax, ezgo txt, speed sensor |
|
|
Similar Threads | ||||
Thread | Forum | |||
"HELP" Kinroad golf cart bad speed sensor | Electric golf carts | |||
01' Ezgo TXT with "alltrax" Snail speed | Electric EZGO | |||
Alltrax SR48500 controller "Global Shutdown" | Electric Club Car | |||
Junk speed controller or solenoid/resistors issue? no "0 speed" instant ~1/2 throttle | Columbia ParCar |