|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-18-2009, 12:58 PM | #1 |
Not Yet Wild
Join Date: Jan 2008
Posts: 12
|
Hello all...opinions needed
Hello from Colorado.....
I have a g16 that I have spent he last few months fixing all the little things wrong with it. Got it to where it runs good and is reliable. The cart is mainly used for pit duy at he race track and camping/trail riding. I have 20" tires on it, and it does fine as a pit cart, but up in the hills it needs more torque. I'm torn between maybe adding a 13hp or maybe a 16hp engine or just going with a torque kit and different clutch on the stock motor. I can't seem to find any hipo parts for he stock motor. Opinions please.......... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-18-2009, 01:40 PM | #2 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Hello all...opinions needed
You can change the jet in carb and modify the air got to help a little. Site sponsor Carts parts plus has some hipo parts. Also Plowmans Carts has parts also for the stock engine.
|
01-19-2009, 10:52 AM | #3 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: Hello all...opinions needed
I would start with the spring/spacer torque kit.
|
|
|
01-19-2009, 07:26 PM | #4 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Hello all...opinions needed
Or better yet, how old is the belt? might be time for a new one.........
|
01-22-2009, 02:10 PM | #5 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Hello all...opinions needed
Welcome to the forum Bamfster...........
|
01-22-2009, 05:48 PM | #6 |
Not Yet Wild
Join Date: Jan 2008
Posts: 12
|
Re: Hello all...opinions needed
Thanks for the responese so far guys.... I checked Plowman's and he has a kit that takes the stock Yami (9 hp?) to 15 hp. Is this realistic or is it just a guess? Anyone here try that kit on a stock g16? Keep the ideas coming.
|
01-22-2009, 07:07 PM | #7 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Hello all...opinions needed
Best idea = http://www.cartpartsplus.com/18-hp-v...maha-g-16.html IMO!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-22-2009, 07:42 PM | #8 |
supervision required
Join Date: Dec 2007
Location: Augusta AR.
Posts: 2,225
|
Re: Hello all...opinions needed
Welcome to BGW, LOTS of opinions here
|
01-22-2009, 08:40 PM | #9 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Hello all...opinions needed
I put that kit on a g-16 with 22'' wheels and the power really surprised me. I always climb the same hill when I put lift and larger tires on carts and it is the first cart to pull it from a dead stop and almost spin the tires. I don't think it is getting the speed it should, but I haven't had the time to talk to Don about it.
|
01-22-2009, 09:26 PM | #10 | |
Not Yet Wild
Join Date: Jan 2008
Posts: 12
|
Re: Hello all...opinions needed
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Opinions needed... | Gas EZGO | |||
Need some opinions | Lifted Golf Carts | |||
Your opinions on this lift please... | Lifted Golf Carts | |||
I need some opinions... | Lifted Golf Carts |