Chamber Adjustments

blkbnzoo · 10-13-2019, 10:41 AM

Looking for ideas on 2013 club car president camber adjustment. Cart has worned out at least 2 tires. I've tried to do the middle leaf spring camber adjustment. With the cart on jacks I can get my tires pretty equally square on both sides. As soon as I put the cart down theres light 1/4 inch gap on top both sides. Also in doing that my steering wheel is of center. Last thing may sound silly but are you suppose to make camber adjustments with cart on the ground or jacked up ? Any ideas would be appreciated.

chrisr32 · 10-13-2019, 12:09 PM

Camber would be done on the ground with typically some positive is desired and toe in.

https://www.golfcarttiresupply.com/g...ent-reference/

Golf cart guy · 10-13-2019, 02:44 PM

First off, really rare to have to make a camber adjustment on a Club Car.

Chances are better that you have worn bushings. You need to look close and you need to check the leaf spring bushings, not only the A arm bushings. Toe adjustment is 99.9 percent of the time the only adjustment you have to do.

10-13-2019, 10:41 AM	#1
blkbnzoo Not Yet Wild Join Date: Nov 2015 Location: Florida Posts: 33	Chamber Adjustments Looking for ideas on 2013 club car president camber adjustment. Cart has worned out at least 2 tires. I've tried to do the middle leaf spring camber adjustment. With the cart on jacks I can get my tires pretty equally square on both sides. As soon as I put the cart down theres light 1/4 inch gap on top both sides. Also in doing that my steering wheel is of center. Last thing may sound silly but are you suppose to make camber adjustments with cart on the ground or jacked up ? Any ideas would be appreciated.

10-13-2019, 12:09 PM	#2
chrisr32 Gone Wild Join Date: Jan 2019 Posts: 190	Re: Chamber Adjustments Camber would be done on the ground with typically some positive is desired and toe in. https://www.golfcarttiresupply.com/g...ent-reference/
chrisr32 Gone Wild Join Date: Jan 2019 Posts: 190

10-13-2019, 02:44 PM	#3
Golf cart guy Gone Wild Join Date: May 2015 Location: Central Florida Posts: 2,114	Re: Chamber Adjustments First off, really rare to have to make a camber adjustment on a Club Car. Chances are better that you have worn bushings. You need to look close and you need to check the leaf spring bushings, not only the A arm bushings. Toe adjustment is 99.9 percent of the time the only adjustment you have to do.

Similar Threads
Thread	Forum
G1 air chamber/boost bottle	Gas Yamaha
DIY exhaust for pre-88 2pg? No expansion chamber?	Gas EZGO
ISO 92 Club Car DS INTAKE EXPANSION CHAMBER	Gas Club Car
EZ Go No Fuel to Piston chamber	Gas EZGO
Wheels lean inward .. Chamber Issue?	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum