charger not shutting down

[Norklin]

Yeah if my OBC ever goes out I'm just gonna right to an onboard charger that doesn't need it.

[NoleFan4Ever]

For temporary you need to run both the black 10g wire and the grey "sense" wire from the back of the charger receptacle directly to the pack negative battery post. You also need to connect the Blue and White wires together on the harness side of the OBC 6-pin connector with a paperclip or stiff piece of wire.

For permanent, cut the two (2) Black 10g wires at the OBC and butt connect them together with a Yellow connector, then unplug the 6 pin connector and on the carts harness side, cut the Blue wire and the White wire and butt connect them together with a red or blue connector. The OBC is now fully bypassed and can be removed if you want to remove and reroute the 6g cable back to B-.

[Fairtax4me]

Originally Posted by jacobsond

12 pages on how to bypass the OBC. kind of confusing. Is there a simple diagram?

There is now!

This question gets asked a lot so I tried to make a quick How To thread with pics of the wire connections needed to bypass for using a smart charger. https://www.buggiesgonewild.com/show...88#post1725988

[Sergio]

Originally Posted by Fairtax4me

There is now!

This question gets asked a lot so I tried to make a quick How To thread with pics of the wire connections needed to the they bypass for using a smart charger. https://www.buggiesgonewild.com/show...88#post1725988

Looks good now, but before long it will be another 31 pages long too

[Fairtax4me]

That's OK, because now if anyone needs it they can just link Post #1 and get relevant info right away.

[jacobsond]

Ordered from revolution. Seems like a sensible upgrade to the charger.

[NoleFan4Ever]

It is...