lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-19-2020, 10:37 PM   #1
Tomahawk
Not Yet Wild
 
Join Date: Jul 2016
Posts: 52
Default Bearing retainer, maybe Iím okay?

Hey, so I was tearing down my 05 precedent today and for whatever reason felt like popping off the speed sensor to check out the magnet to see if it looked okay. I didnít realize that it was only clipped in and started to unscrew the two screws next to it. I donít think I removed them completely and I screwed them both back down and they tightened up. I am thinking I dodged a bullet here. But, just in case, what symptoms would I need to look out for? Iíve seen a few threads in this but only people that lost the retainer and had to go through the process to get it bolted back down.

Cart has a GE motor, which Iím not sure is a good or bad thing.
Tomahawk is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-19-2020, 11:13 PM   #2
buckmanmike
Gone Wild
 
buckmanmike's Avatar
 
Join Date: Oct 2007
Location: Snellville, Ga.
Posts: 1,190
Default Re: Bearing retainer, maybe Iím okay?

Im not a guru, but having a problem understanding the question. Maybe just me.
buckmanmike is offline   Reply With Quote
Old 07-20-2020, 05:54 AM   #3
movin-on
Gone Wild
Club Car
 
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 388
Default Re: Bearing retainer, maybe Iím okay?

I think that your good as long as they screwed back down....The bearing retainer screws are 7/8 inches long and would just keep turning if they were out of the retainer...You would have to pull the motor and remove the end cap to get them back in otherwise...Nothing wrong with a GE motor..They are comparable to the ADC motor that CC uses now and are both interchangable...
movin-on is offline   Reply With Quote
Old 07-20-2020, 06:29 AM   #4
Tomahawk
Not Yet Wild
 
Join Date: Jul 2016
Posts: 52
Default Re: Bearing retainer, maybe Iím okay?

Thanks. I wasnít sure if maybe the case was threaded too. It didnít make sense that it would be, but Iíve never torn into a motor so wanted an opinion.

Buckmanmike- I accidentally unscrewed the bearing retainer screws on my ge motor. But when I realized they were not part of the speed sensor I tightened them back down. Was concerned about whether or not If my bearing retainer was now just chilling in the motor not attached. But the screws tightened down so hopefully all is good.
Tomahawk is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
GE motor bearing retainer, and where to find one? Electric Club Car
club car bearing retainer screws Electric Club Car
FREE DS C-Car golf bag retainer Electric Club Car
Need to fish for the bearing retainer in a GE motor Electric Club Car
Need a bearing holder/retainer? Electric EZGO


All times are GMT -5. The time now is 12:45 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.