lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-23-2017, 05:17 AM   #1
1Snoopydog
Not Yet Wild
Yamaha
 
Join Date: Dec 2017
Location: Aiken, Sc
Posts: 9
Default G29 rocker panels hit rear wheels after lift kit

Did a 6" A arm lift on a yamaha G29, put 10" rims and 22" knobby tires. Tried to reinstall rocker panels and found the rear tip of the rocker panels hit the rear wheels. Some people talk about trimming the rocker panel but it leaves an open edge instead of the finished look. Considered stainless or diamond plate replacement rockers. Any ideas for a good looking solution ?
1Snoopydog is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Aluminium Rocker Panels Gas EZGO
G2 rocker panels? Gas Yamaha
Rocker panels for my MPT 1000 Electric EZGO
rocker panels Golf Carts and Parts
Wtb ezgo rocker panels Golf Carts and Parts


All times are GMT -5. The time now is 04:29 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.