2007 Precedent not moving

sean31 · 09-30-2020, 11:06 PM

Quote:

Originally Posted by sean31

plugged into controller and doesn't show any trouble codes. However its showing low pack voltage when the pedal is pushed. I put a VOM on the pack and shows 51VDC. We reset the controller and it ran perfect till we stopped then back to the same issue. Going to call Alltrax in the am and see what they say. Thanks

As it turned out it was to do with the controller. Got with Alltrax (took a bit as they were evacuated due to fires nearby to them in OR) tech support is awesome over there. Changed a few settings and we were working good as new.
Sean

DanielMv720 · 09-30-2020, 11:35 PM

If you can post the settings that Alltrax provided you it could help any members in the future who run into the same issue .

09-30-2020, 11:35 PM	#12
DanielMv720 Not Yet Wild Join Date: Oct 2017 Location: Mesa,AZ Posts: 57	Re: 2007 Precedent not moving If you can post the settings that Alltrax provided you it could help any members in the future who run into the same issue .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Yamaha Drive 2007 Not Moving	Electric Yamaha
2007 EZGO 4 person shuttle not moving SEPEX controller	Electric EZGO
2007 CC president not moving but clicking.	Electric Club Car
06 precedent not moving HELP	Electric Club Car
2007 G22 Starts moving then stops	Electric Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum