|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-02-2020, 03:16 PM | #1 |
Gone Wild
Join Date: Oct 2008
Location: Ky
Posts: 241
|
Brake lights and turnsignals
I just installed a LED light system on a 2018 President. All plug and play ultimate kit. It is the Rec Pro kit. Never did get the brake lights to work. After exhausting every thing I knew to try I decided to wire the brake lights up with a direct 12 v. feed from the voltage reducer and wired them into the switch. The timer didn't work either this way. Apparently there is a difference between right and left because the right side works great but the left turn signal stops flashing when I push the brake. I'm thinking I need a diode or two in there somewhere. Can anybody steer me in the right direction?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
yahama gas - turnsignals issue | Gas Yamaha | |||
Front Lights, Directional, Brake Lights not working | Electric Club Car | |||
Installing Blinkers/Brake Lights on Existing LED lights | Electric EZGO | |||
Wiring for Head ligths, Tail Lights, Brake Lights and Turn Signals | Gas EZGO | |||
Blew all lights, new tail lights wont get brighter on brake press. | Electric Club Car |