|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-18-2013, 07:44 PM | #21 |
Gone Wild
Join Date: Nov 2008
Posts: 370
|
Re: G1 motor question
you cant see the jug, i was just browsing the net, people say using simple green? worth a shot or just get one of the 2 u said?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-18-2013, 07:46 PM | #22 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 motor question
I've had Simple Green actually start to etch metal before. It has taken the skin off of my fingers. That's why I don't use it anymore. Fuel oil, diesel, or kerosene.
|
11-18-2013, 07:47 PM | #23 |
Gone Wild
Join Date: Nov 2008
Posts: 370
|
Re: G1 motor question
wow, fair enough, i will prolly just end up putting kerosene thru it.
|
11-18-2013, 07:49 PM | #24 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 motor question
It's an old farmer trick. If we had something that was seized, we just soaked it in kerosene or diesel for a while.
|
11-18-2013, 07:50 PM | #25 |
Gone Wild
Join Date: Nov 2008
Posts: 370
|
Re: G1 motor question
i appreciate your help man, going out to run errands tonight will dump some in it and will let u know tomorrow , prolly let it sit over night :)
|
11-18-2013, 07:52 PM | #26 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 motor question
Hopefully it's just set up a little from sitting around and nothing is broken. Good luck.
|
11-18-2013, 07:53 PM | #27 |
Gone Wild
Join Date: Nov 2008
Posts: 370
|
Re: G1 motor question
that's what im hoping for , got a good deal for $125 being told it ran when pulled, and i didn't check to turn it over :( thanks again
|
11-19-2013, 06:20 PM | #28 |
Gone Wild
Join Date: Nov 2008
Posts: 370
|
Re: G1 motor question
well put kerosene down the spark plug hole lastnight at like 11 and checked it at about 4:30 today, no give what so ever, I then tipped the motor on the side and filled it from the exhaust port and filled it to the top(kerosene staying in) I think all the kerosene came out from the spark plug hole( put plug back in)
so my question is , how long should I leave this kerosene in the motor? |
11-19-2013, 06:44 PM | #29 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 motor question
If it doesn't free up in a day or so, you have more serious problems. The crank bearings could be seized. How hard are you trying to turn the clutch?
When you try to turn it, look inside the exhaust port and see if the piston is moving at all. If it moves just a tiny bit, could be frozen rings. |
11-19-2013, 06:46 PM | #30 |
Gone Wild
Join Date: Nov 2008
Posts: 370
|
Re: G1 motor question
Ok. Ill let it sit a couple days and see what happens. Thanks again
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor question | Electric Club Car | |||
Motor question | Gas EZGO | |||
eZ go motor question | Electric EZGO | |||
Motor Question | Electric Yamaha | |||
ec 25 motor question | Gas EZGO |