|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
11-21-2013, 10:00 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2013
Posts: 4
|
Replacing an Input shaft on a g5
Hello all!
Trying to figure out how to replace the input shaft on an old yamaha G5 (1995) Is there an easy way to do this without pulling the whole transmission apart? Any help would be much appreciated! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-21-2013, 11:13 PM
|
#2 |
|
Not Yet Wild
Join Date: Sep 2013
Posts: 4
|
Re: Replacing an Input shaft on a g5
SO after further inspection, I think I just need to rethread the input shaft. Does anyone know what the thread count is on these? I saw in another thread that the count on G2's is 12-1.25. Is this the same on all carts?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Input shaft | Electric EZGO | |||
| Replacing Bearings on Input Shaft? | Electric EZGO | |||
| G16 input shaft | Gas Yamaha | |||
| G9 Input Shaft? | Gas Yamaha | |||
| need input shaft for G2 | Golf Carts and Parts | |||
Linear Mode
