|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-11-2014, 07:47 PM | #1 |
Not Yet Wild
Join Date: Feb 2014
Location: Tennessee
Posts: 17
|
G16- lift & tires info
Hi, My work on my stock G16 Gas is coming along nice- Thanks to everyone's help! Now I have some questions regarding lift/tires- The tires that were on my cart are stock and now 2 have gone flat and won't air up-shot! I have it up on jackstands now -going over most everything I think it might need- and am in the process of making a parts order- I'm just planning on using around my farm nothing very steep-not sure what the biggest tire /wheel will work without lift-May like to go a little bigger than stock-20x10-10 if so what lift do you suggest or how much power will it kill, if I go with 22x11-10- Sahara Classic AT Tires? Lift kit preferences? I have no way to test out my work and how its gonna do without buying something and I hate to buy stock then decide to lift also I think a very large security guard drove this cart around , by himself and I think the front shock may be gone, leans a bit to drivers side- suggestions for shocks- whether I lift or not? Thanks again
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-11-2014, 09:21 PM | #2 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G16- lift & tires info
Yamaha's are known to lean,due to the coils getting tired.A 5" lift will fit 22" tires nicely,a 3" will fit 20" tires.The only mods.needed for general use are to bypass the governor,and I prefer synthetic oil since they are splash-lube(no oil-pump).A stock,lifted G16 will do very well of road,my wife's is quite impressive for a stock motor.Hope this helps.
|
03-11-2014, 09:23 PM | #3 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G16- lift & tires info
Yamaha's are known to lean,due to the coils getting tired.Stock tires are 18".A 5" lift will fit 22" tires nicely,a 3" will fit 20" tires.The only mods.needed for general use are to bypass the governor,and I prefer synthetic oil since they are splash-lube(no oil-pump).A stock,lifted G16 will do very well of road,my wife's is quite impressive for a stock motor.Hope this helps.
|
03-11-2014, 11:51 PM | #4 |
Not Yet Wild
Join Date: Feb 2014
Location: Tennessee
Posts: 17
|
Re: G16- lift & tires info
I was doing a search for Jakes lifts and I found contradicting different info, some says # 6253 is a 5" lift and some show it as a 6" lift with same Jakes# , any ideas? I have sorta picked out some 10x7 troopers with 22x11-10 Sahara classic AT tires,?? whatta ya think?
also what type and weight of the synthetic you prefer? |
03-12-2014, 01:05 AM | #5 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: G16- lift & tires info
Mobil 1 10w30 synthetic.. 7$ at wally world
|
03-12-2014, 06:54 AM | #6 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G16- lift & tires info
Mobil-1,Valvoline,Castrol,or Kendall are all good choices.If you want to spend a little more,but have an oil specific to your application,get Klotz,its made for splash-lube go kart race motors.Hope this helps.
|
03-12-2014, 10:15 AM | #7 | |
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: G16- lift & tires info
Quote:
Post up some pics when your done! |
|
03-12-2014, 11:36 AM | #8 |
Not Yet Wild
Join Date: Feb 2014
Location: Tennessee
Posts: 17
|
Re: G16- lift & tires info
Thanks. Am taking pics as it progresses. Will post some later when I figure out how to lol, Also. In looking at the 6" jakes a arm 6253 , in their photos it appears that there are new bushings in the arms for king pins and also on other ends. Does anyone know , as I need to rebuild at least one of my king pin & bushings that is worn and wasn't sure what all I would need to order in addition to the jakes kit.
|
03-12-2014, 12:47 PM | #9 |
Not Yet Wild
Join Date: Feb 2014
Location: Tennessee
Posts: 17
|
Re: G16- lift & tires info
I jumped the gun- just watched the jakes lift video and it says it comes with new bushings. So I guess I'll just need new dust seals :)
|
03-12-2014, 09:22 PM | #10 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: G16- lift & tires info
It comes with the bushings but not king pins. I would recommend changing them while it is apart.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Tomberlin Lift Kit Info | Tomberlin | |||
Lift info | Electric EZGO | |||
I need Info for a Lift kit on a 1996 ezgo dcs | Electric EZGO | |||
Anyone fitted 14" wheels & street tires to their Ezgo, any pics or info? thanks | Electric EZGO | |||
Oil pressure sensor, Gov and Lift Kit info | Gas EZGO |