1991 just quit

blksmkstroke · 04-13-2009, 04:54 PM

I have 37.3 volts on the pack.

blksmkstroke · 04-13-2009, 05:06 PM

I have just discovered something on the wiring diagrams that I have. These two show going from the key switch to normally closed on one and to the common on the other. Which one is correct? or does it matter? Thanksezgoserieswiringht5.jpg

Marathon%20Controller%20Wiring%20Diagram.jpg

pggroves · 04-13-2009, 05:35 PM

One is factory wiring from the manual.
You choose which you trust.

blksmkstroke · 04-13-2009, 07:26 PM

I had it wired by the one that you sent me PG. Was just curious if the other was right too. Thanks

htr1 · 04-14-2009, 04:32 PM

I got to NY and the EZGO was EZ don't go. I had uninvited vagrants who feel the need to drive the Buggy and needed to break it. I grabbed the solenoid and micro wires and looking for the these.

gatormeup · 04-15-2009, 06:22 PM

i did mine by the factory one as mine was in total dissaray when i got it, i did mine by the factory and have had no issuses, prob want to go with that one! test twice to be sure, these parts can get expensive quickly!! trust me!! i replaced two micros, new solenoid, all new wires, turns out the last thing i replaced, the micro next to the solenoid was my problem!

04-13-2009, 04:54 PM	#11
blksmkstroke Not Yet Wild Join Date: Mar 2009 Location: Crandall, TX Posts: 20	Re: 1991 just quit I have 37.3 volts on the pack.

04-13-2009, 05:06 PM	#12
blksmkstroke Not Yet Wild Join Date: Mar 2009 Location: Crandall, TX Posts: 20	Re: 1991 just quit I have just discovered something on the wiring diagrams that I have. These two show going from the key switch to normally closed on one and to the common on the other. Which one is correct? or does it matter? Thanksezgoserieswiringht5.jpg Marathon%20Controller%20Wiring%20Diagram.jpg

04-13-2009, 05:35 PM	#13
pggroves steeplejack x Join Date: Jan 2007 Location: Republic of Texas Posts: 3,382	Re: 1991 just quit One is factory wiring from the manual. You choose which you trust.

04-13-2009, 07:26 PM	#14
blksmkstroke Not Yet Wild Join Date: Mar 2009 Location: Crandall, TX Posts: 20	Re: 1991 just quit I had it wired by the one that you sent me PG. Was just curious if the other was right too. Thanks

04-14-2009, 04:32 PM	#15
htr1 Not Yet Wild Join Date: Jan 2009 Location: Columbus, IN - Jamestown, NY Posts: 7	Re: 1991 just quit I got to NY and the EZGO was EZ don't go. I had uninvited vagrants who feel the need to drive the Buggy and needed to break it. I grabbed the solenoid and micro wires and looking for the these.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-15-2009, 06:22 PM	#16
gatormeup Gone Wild Join Date: Aug 2008 Location: Pine Mtn,Ga Posts: 230	Re: 1991 just quit i did mine by the factory one as mine was in total dissaray when i got it, i did mine by the factory and have had no issuses, prob want to go with that one! test twice to be sure, these parts can get expensive quickly!! trust me!! i replaced two micros, new solenoid, all new wires, turns out the last thing i replaced, the micro next to the solenoid was my problem!

Similar Threads
Thread	Forum
Just quit...	Electric EZGO
1991 EZGo Marathon Electric Just Quit	Electric EZGO
96 club car just quit	Electric Club Car
governer quit!	Gas Club Car
EZGO quit	Electric EZGO