|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-16-2010, 04:11 AM | #1 |
Gone Wild
Join Date: Mar 2010
Location: CLEARWATER,FL.
Posts: 555
|
4 ga. Cables
I recently got new batteries and switched the battery cables and the cables to the controller with 4 ga. Cables.does anyone know the length i need to order for the controller to motor wires? Any other cables that i need to change?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2010, 04:48 AM | #2 |
Gone Wild
Join Date: Apr 2009
Location: Vegas NV
Posts: 262
|
Re: 4 ga. Cables
Order a set. The store knows the length.
|
04-16-2010, 08:35 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: 4 ga. Cables
Measurements sent shortly
|
04-16-2010, 09:05 AM | #4 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
Re: 4 ga. Cables
Nice gesture for the venders, but that is not what the poster asked. I, for one, will not order a set when I can make them every bit as good as the "bought set", for a fraction of the cost. The man asked for "measurments".
RXP, I pulled my cables, a few at a time, and made them up that way. It might have taken a very few minutes longer that way, but I knew I had them correctly cut to length. |
04-16-2010, 03:24 PM | #5 |
Gone Wild
Join Date: Mar 2010
Location: CLEARWATER,FL.
Posts: 555
|
Re: 4 ga. Cables
THANKS SPOILED
|
04-16-2010, 05:02 PM | #6 |
Getting Wild
Join Date: Apr 2010
Location: los angeles
Posts: 126
|
Re: 4 ga. Cables
I'm sorry about that. My reply was premised on my costings. I can get a set of 4 gauge cables (for a Club Car) for something less than US$20. I do not have a crimping equipment so I would have to use a hammer. Not nice-looking enough. Measurements can done by actually measuring the distance between whatever you want to put the cables. Is that a big deal? Nothing technical really.
|
04-16-2010, 05:03 PM | #7 |
Getting Wild
Join Date: Apr 2010
Location: los angeles
Posts: 126
|
Re: 4 ga. Cables
Addendum: Take the old cables and measure!
|
04-16-2010, 08:25 PM | #8 |
Gone Wild
Join Date: Jan 2010
Location: NC Florida
Posts: 348
|
Re: 4 ga. Cables
Use a cloth measuring tape which is flexible & you won't have to remove the cables to measure them.
Ross |
04-16-2010, 09:18 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: 4 ga. Cables
Use the secret measurements scottyb sent you and you are good to go
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1/0 Battery Cables to 6 AWG Motor Cables | Electric EZGO | |||
what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO | |||
Upgrading cables | Electric EZGO | |||
New Cables | Electric Club Car | |||
G9 cables | Gas Yamaha |