|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-20-2014, 09:38 AM | #21 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 36 volt EZ-GO won't charge
The white radsock shield... Did it accidentally end up on the wrong plug. Look in the charger handle, look for the side with two terminals. That corresponding side on the cart port must not have the white shield on it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-20-2014, 09:41 AM | #22 |
Not Yet Wild
Join Date: Nov 2014
Posts: 10
|
Re: 36 volt EZ-GO won't charge
Both female radsoks had the white plastic insulator on them. Someone had repaired it prior to my encounter.
I replaced the neg radsok to eliminate the insulator and now we are charging! Sometimes it's hard to see the trees because of the forest. Thanks for all the help everyone,it is truly is appreciated. |
11-20-2014, 09:43 AM | #23 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 36 volt EZ-GO won't charge
Good detective work
|
11-20-2014, 09:58 AM | #24 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 36 volt EZ-GO won't charge
I learned something today also.
Having an insulator installed on the negative radsok never occurred to me. Glad to hear you found and fixed the problem. |
11-20-2014, 10:11 AM | #25 |
Not Yet Wild
Join Date: Nov 2014
Posts: 10
|
Re: 36 volt EZ-GO won't charge
Again ya'll-thank-you
|
11-28-2014, 07:05 AM | #26 |
Not Yet Wild
Join Date: Oct 2014
Posts: 5
|
Re: 36 volt EZ-GO won't charge
Thanks cgtech.
|
08-13-2017, 09:45 AM | #27 |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: 36 volt EZ-GO won't charge
Hey guys, first post here. Great forum, I've learned a lot in the last few weeks lurking on the site. I am having the same issue as Jlusk with charging. I replaced the receptacle with a new one and it has the white insulation on both pos and neg terminals. Do I need to remove the insulator on the ground side so that it can contact the little prong down inside the charger plug? That's what I read above just wanted to make sure. Thanks.
|
08-13-2017, 09:53 AM | #28 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 36 volt EZ-GO won't charge
Quote:
It depends on the make/model of the charger since not all chargers use the outside of the negative radsok for battery sensing. Try removing the insulator and if that doesn't fix it, start a new thread and we will troubleshoot the problem. |
|
08-13-2017, 10:14 AM | #29 |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: 36 volt EZ-GO won't charge
Thanks johnnieb. I'll report back. Btw, it's a 2009 PDS
Last edited by Dixie Chopper; 08-13-2017 at 10:14 AM.. Reason: Mkre info |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
36 volt Trojans won't take charge | Electric EZGO | |||
36 Volt DCS TXT Charge Issue?? | Electric EZGO | |||
Charge 48 volt cart with 36 and 12 volt charger | Electric EZGO | |||
Looking for 72 volt charge gauge | Electric golf carts | |||
ezgo 36 volt charger min volt for charge? | Electric golf carts |