Having problems with my 2000 electric golf cart shuttle over heating

yurtle · 07-17-2015, 02:59 AM

Motor is fine on 48 volts. The solenoid needs to be capable of 48 volts. Most standard solenoids are not capable of a range of voltages. NOTE: this is only a factor in the coil - small wires. The larger cables, FNR (unless reversing contactor) motor, etc. don't care about voltage. They only care about current.

scottyb · 07-17-2015, 09:19 AM

Which solenoid is it? The MZJ400 will run on 36-48 volts without a problem

sebarker75 · 07-17-2015, 09:51 AM

it is the 20523 Solenoid, 36V 4 P, Silver HD, the motor is AMD Series, 36V 6 HP EZGO Speed (R10-4003), the F AND R Switch is the 5799 Ezgo 94 and up, High Output, and the controller is a Curtis, EZGO 36/48 500A Series. I just want to get the right stuff for my cart. I have jacked with Ray Woods at buggies unlimited enough. All he has done is broken promises. Its going on 4 months now without any progress.

07-17-2015, 02:59 AM	#11
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Having problems with my 2000 electric golf cart shuttle over heating Motor is fine on 48 volts. The solenoid needs to be capable of 48 volts. Most standard solenoids are not capable of a range of voltages. NOTE: this is only a factor in the coil - small wires. The larger cables, FNR (unless reversing contactor) motor, etc. don't care about voltage. They only care about current.

07-17-2015, 09:19 AM	#12
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Having problems with my 2000 electric golf cart shuttle over heating Which solenoid is it? The MZJ400 will run on 36-48 volts without a problem

07-17-2015, 09:51 AM	#13
sebarker75 Not Yet Wild Join Date: Dec 2014 Location: Longview tx Posts: 28	Re: Having problems with my 2000 electric golf cart shuttle over heating it is the 20523 Solenoid, 36V 4 P, Silver HD, the motor is AMD Series, 36V 6 HP EZGO Speed (R10-4003), the F AND R Switch is the 5799 Ezgo 94 and up, High Output, and the controller is a Curtis, EZGO 36/48 500A Series. I just want to get the right stuff for my cart. I have jacked with Ray Woods at buggies unlimited enough. All he has done is broken promises. Its going on 4 months now without any progress.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Pre 1970 Pargo Electric golf cart problems	Columbia ParCar
wanted: electric golf cart 2000 or newer	Golf Carts and Parts
2000 ez go txt electric golf cart manual	Electric EZGO
Over Heating 2003 Electric Cart	Electric Club Car
2000 Ezgo Electric With Problems	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum