|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-18-2015, 07:17 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2010
Posts: 6
|
Alltrax controller settings
Ok so I just upgraded my motor and I have a axe alltrax controller and I want to make sure all my settings are right... I have downloaded driver from alltrax site and I have the right cables and addressed the port on laptop etc.. So now I don't know what the settings should be?? I have a txt series cart.. I want full power reverse which I already had so no change there. Field mapping change with new motor? Also the focusing part I read was that if I wanted to check it in cart I would have to press gas pedal to power the controller to change or check settings?? I don't want to pull it out to program it on bench..
Over voltage ? Under voltage? Turbo? Etc etc.. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-18-2015, 07:29 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Alltrax controller settings
No Field maps in Series drive carts. You can program in the cart, no problem.
|
|
|
|
07-18-2015, 07:29 PM
|
#3 |
|
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: Alltrax controller settings
Remove one of the wires from the solenoid. I removed one of the small wires. Then no problem with the cart moving on you.
|
|
|
|
|
07-18-2015, 08:08 PM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2010
Posts: 6
|
Re: Alltrax controller settings
Gotcha .. Thanks
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax Settings | Electric EZGO | |||
| Alltrax settings | Electric EZGO | |||
| Alltrax DCX 400 Settings | Electric EZGO | |||
| Alltrax dcx settings | Electric EZGO | |||
| Settings on alltrax controller? | Electric EZGO | |||
Linear Mode
