ezgo txt 48 fnr replacement needed?

wheelnsniper · 05-26-2016, 03:27 AM

Hey all. I have a 2012 ezgo txt 48. According to the chart up in the sticky a sepex PDS with the toggle in the dash. I have looked all around and see people having to replace there manual by the legs fnr as they upgrade controllers and motors. I haven't seen anything on if or how to replace my setup. So question is will I have to or will this setup hold whatever I throw at it. No more than a 500amp controller and motor of some sorts (undecided) thanks all

Matt

wheelnsniper · 05-26-2016, 03:36 AM

May have actually just answered my own question. Was looking at alltrax wiring diagram and looks like the toggle goes straight to the controller. I assume that would mean all the large voltage goes through the controller and the toggle is just sending a signal. So no replacement needed? Sorry if I am completely wrong

gornoman · 05-26-2016, 05:47 AM

You are correct. No need to upgrade the F/R on a sepex (DCS, PDS on EZ-Go) drivetrain.

05-26-2016, 03:27 AM	#1
wheelnsniper Getting Wild Join Date: May 2016 Posts: 105	ezgo txt 48 fnr replacement needed? Hey all. I have a 2012 ezgo txt 48. According to the chart up in the sticky a sepex PDS with the toggle in the dash. I have looked all around and see people having to replace there manual by the legs fnr as they upgrade controllers and motors. I haven't seen anything on if or how to replace my setup. So question is will I have to or will this setup hold whatever I throw at it. No more than a 500amp controller and motor of some sorts (undecided) thanks all Matt
wheelnsniper Getting Wild Join Date: May 2016 Posts: 105

05-26-2016, 03:36 AM	#2
wheelnsniper Getting Wild Join Date: May 2016 Posts: 105	Re: ezgo txt 48 fnr replacement needed? May have actually just answered my own question. Was looking at alltrax wiring diagram and looks like the toggle goes straight to the controller. I assume that would mean all the large voltage goes through the controller and the toggle is just sending a signal. So no replacement needed? Sorry if I am completely wrong
wheelnsniper Getting Wild Join Date: May 2016 Posts: 105

05-26-2016, 05:47 AM	#3
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,289	Re: ezgo txt 48 fnr replacement needed? You are correct. No need to upgrade the F/R on a sepex (DCS, PDS on EZ-Go) drivetrain.

Similar Threads
Thread	Forum
Needed EZGo Part Discontinued. Replacement thoughts?	Electric EZGO
1987 Marathon Brake assembly needed or replacement part number	Gas EZGO
controller replacement advice needed	Electric Yamaha
Help needed to identify axle and locate replacement part	Gas EZGO
36 volt motor replacement needed!	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum