Another lighting question

[82EZTank]

Ok, I am sure this has beaten into the ground a million times, but I haven't found a straight forward...this is what you do answer. I bought my 03 TXT gasser and in order to make it street legal I had to add turn signals. I bought a universal turn signal kit that came with instructions, but they seem to be missing a key component. My kit has the green wire and yellow going to the front lights, orange and brown going to the rears, a blue wire that goes to the flasher, a white for ground. Then black that goes to the flasher, and then the red will go to my stoplight switch when I get it. I have it hooked up exactly how it says, minus it shows it needs a ground for each light. The kit that came on the cart is a 3 wire set up, black, red, white. What wires do I splice into from my universal harness? The wiring schematic is very vague besides telling what wire goes to what wire goes to which corner. I have it wired how I think it should go, and I have headlights and taillights still, but the turn signal is still dead. Any guidance is appreciated.

[MILLERTIME]

You will have to make a wiring harness.

[82EZTank]

Ok, that is kinda the same instructions I got with the turn signal kit, but what wires do they attach to at the corners? Do I run the orange wire to the left rear and attach it to the black, red or white wire? All it shows is the what wire goes to what corner. Thanks for the picture, but without knowing what wire to splice into to energize the turn signal switch, that diagram is worthless.

[MILLERTIME]

Rear light should be
Red wire Brake light / turn signal.
White wire Tail light / running light.
Black wire ground.

[82EZTank]

Ok, so what am I connecting the yellow, green, orange, and brown wires to?

Yellow-left front splices in to? Red, black or white?
Green-right front, splices in to? Red black or white?
Orange-left rear, splices in to? Red, black or white?
Brown-right rear, splices in to? Red, black or white?

I know what the colors do, I just need to know the above...I feel like I am being jerk-ish, but I really am looking for a cut and dry answer.��

[Camohorse1978]

Like on a trailer , one wire is for turn , one is for stop/running g lights and other is a ground . Just pop the lens and see what wire goes to the turn bulb . Been awhile since I have wired one so don't remember the color , but is very straight forward and pretty self explanatory

[lockman1]

Originally Posted by 82EZTank

Ok, so what am I connecting the yellow, green, orange, and brown wires to?

Yellow-left front splices in to? Red
Green-right front, splices in to? Red
Orange-left rear, splices in to? Red
Brown-right rear, splices in to? Red

[MILLERTIME]

Orange-left rear, splices in to Red.
Brown-right rear, splices in to? Red.

Can you post pictures of your front lights?

[lockman1]

Originally Posted by Camohorse1978

Like on a trailer , one wire is for turn , one is for stop/running g lights and other is a ground...

Nope!
Turn/stop is the brighter filament, and are together,
Riding/tail lights are a dimmer filament and use their own circuit!

[82EZTank]

Front lights are halogen, rear lights are LED. Head light wires have a red and white wire that goes to the head light, a black and white that goes to the turn signal, and the two white wires are spliced together before they go to the harness plug. I will try to get pics, but I haven't had any success loading them from my phone(which is normally what I use).