|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-14-2017, 03:13 AM | #1 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Ezgo txt 48 volt not running
2013 48 volt Ezgo txt
Still can't diagnose. Push accelerator and nothing happens. What I know. Batteries are good At yellow wire on new solenoid. I get 51 volts It's not getting the negative volts to the other side. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2017, 07:49 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo txt 48 volt not running
See diagram attached. The neg(-) side of the solenoid activation circuit comes from controller pin 5. If the controller is failing to provide 48 (-) when the pedal is depressed you can disconnect this lead at the solenoid and run a new wire to the controller B -. Also, don't be alarmed if pin 5 is (+) before the pedal is depressed and changes to (-) when the pedal is pushed as it does in the earlier PDS models. GL
|
05-14-2017, 08:38 AM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,181
|
Re: Ezgo txt 48 volt not running
Scotty, diagram update, throttle signal is missing an "h".
|
05-14-2017, 09:19 AM | #4 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: Ezgo txt 48 volt not running
Yup your right...
|
05-14-2017, 09:42 AM | #5 | |
Getting Wild
Join Date: Dec 2012
Posts: 126
|
Re: Ezgo txt 48 volt not running
Quote:
|
|
05-14-2017, 09:43 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo txt 48 volt not running
OMG! - call the spelling police - wait...ok, they're here - phew!
What you didn't catch was the error in my text. I incorrectly identified the coil (-) as pin 5 when actually it is pin 12. I was counting from the wrong side as you can see from the pin out at the bottom right of the page. SO next time don't get hung up on the spell checking look at the meat of the post. LOL |
05-14-2017, 09:45 AM | #7 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
I've got no negative charge on any pin. With pedal pressed and not pressed
|
05-14-2017, 09:47 AM | #8 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
I'm Measuring off the plug is this correct or am
I suppose to measure from the controller |
05-14-2017, 09:52 AM | #9 |
Getting Wild
Join Date: Dec 2012
Posts: 126
|
Re: Ezgo txt 48 volt not running
Disconnect the blue wire from solenoid and test for 48(-). If no, like scotty said jump from b(-) to solenoid (-) and see if it activates with key on.
|
05-14-2017, 09:55 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo txt 48 volt not running
If you have no power at any pin then the problem is more basic. Use the diagram to trace back to where the power (+) for the controller begins.
If you need a quick video on how to use the meter go here > http://www.cartsunlimited.net/troubleshooting-.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
2006 48 volt club car not running | Electric Club Car | |||
2005 EZGO TXT motor not running and running jerky | Electric EZGO | |||
2010 EZGO not running/running very slowly | Electric EZGO | |||
FYI..running volt reading | Electric EZGO | |||
36 volt charger keeps running | Electric Club Car |